Question about 1996 Mazda 626

1 Answer

Tappet settings what are the tappet settings for a 1.8 capallo

Posted by on

  • bazgill Sep 15, 2008

    can any body help with this

  • bazgill Sep 15, 2008

    thanks for your help it looks like they have given me the wrong year

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

Mazda 626 had 2 engine a 2.0 and a 6cyl 2.5
1.8 capallo???

Posted on Sep 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tappet settings on a 1200 toyota corolla 1980 model bakkie


It will be the same as for the 1200 on any other Toyota, i.e. Pulsar etc. If you have 10 thou on the intake and 13 thou on the exhaust set while hot, you are withing range.
We used to say a ticking tappet is a happy tappet, so don't try to eliminate all noise from the tappets, just set them so they don't kill all conversation in the cab.

Apr 03, 2015 | 1980 Toyota Corolla

1 Answer

How do I adjust the tappets on a 1986 1.6i ke laser


easy capri laser?? ford , 4cyl in line --- 1 down adjust 8 =9
1 down adjust 7 =9 and so on 8 down adjust 1 =9 whatever you adjust the numbers add up to 9 ,ford laser capri then tappet settings used to be something like 14 inlet and 18 exhaust but as no doubt the rocker fingers are worn and the push rod cups the 12 and 15 may be better

Mar 12, 2015 | 1986 Chrysler Laser

1 Answer

How do I set tappets of a 2.5 diesel turbo mazda


you haven't mentioned if it is a 4 cyl or not. However bring no 1 cylinder up to tdc and watch the tappets of the next cylinder to fire. when that cylinders rockers are in valve overlap situation ( exhaust starting to close and inlet starting to open) then that will be maximum clearance on no 1 cylinder and is when you set the tappets turning the engine until the next cylinder is at TDC watch for the next cylinder again to be in valve overlap and repeat as for no 1 cylinder

Dec 25, 2014 | Mazda Cars & Trucks

1 Answer

How can i make a tappet clearance of honda vtec 98


You will need a "tappet gauge/blade" and then here is what you have to do:
1. open engine head, its the cover of engine where HONDA is written.
2. Now jack up and one side of the car and put the car in 4th gear
3. Start from any one side, if the tappet is not in "UP" position then rotate the wheel (the jacked up side of car) and once the tappet moves up, stop there.
4. Loosen the nut of the tappet and put the tappet blade in between the tappet gap. Now using screw driver, tighten the tappet so that blade fits snugly between the gap and without moving anything (blade and screw driver) ask a helper to tighten the tappet nut finally.
5. Repeat above procedure for each tappet.

If you do it carefully, there will be no tappet sound at all.

May 09, 2011 | Honda Civic Cars & Trucks

1 Answer

How to measure tappet clearance with dial gauge


When setting tappets, it has to be born inind that the valve stem wears an indentation into the face of the rocker. This prevents a really accurate tappet adjustment, so the customer is right again. If you do not posess a tappet setting dial gauge, a normal engineers dial gauge will do just as well. The procedure is the same as using your feeler gauge except that you set the dial gauge up on the cylinder head with the pointer resting on the head of the rocker. Press down fairly firmly on the rocker valve end and zero the gauge. Next lift up on the rocker and read off the clearance, from the gauge, Use a magnetic base to support your gauge and repeat the pocedure for each valve pair.

Mar 25, 2010 | 1988 Mitsubishi Cargo

1 Answer

How do you set valves on a 1955 331 engine


Engine cold, you set the Intake valve clearance at .0005 to .0025
(.0005 = 5 ten-thousands, or also said as 1/2 thousandths.
.0025 = 2 and a half thousandths)

Set the Exhaust at .001 to .0025
(1 thousandths, to 2 and a half thousandths)

Use a feeler gauge. The Firing Order is just like a Chevy. 1-8-4-3-6-5-7-2
Adjust these mechanical tappets, just like you would for any Chevy engine with mechanical tappets.

Sep 30, 2009 | Cadillac DeVille Cars & Trucks

1 Answer

Tappett settings


my mechanic told me you cant adjust the tappets on these Hyundais because they have hydraulic tappets.He told me to just use premium fuel to stop the rattle.I use 1/2 premium and 1/2 regular unleaded to make it a bit easier on the pocket.
good luck dude

Dec 16, 2008 | 1995 Hyundai Elantra

3 Answers

Tappet/valve settings???


o.25mm when hot this is for inlet and outlet

Jul 28, 2008 | 1988 Mitsubishi Pickup

Not finding what you are looking for?
1996 Mazda 626 Logo

Related Topics:

490 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...