Question about 2004 Ford Mustang

1 Answer

CLUTCH ISSUES I have a 2004 ford mustang V6...Pony....when I turn the car on, it makes a lous squeeling....and when you press the clutch it starts grinding....I know it has something to do with the clutch, but my question is where do you put the clutch oil? People say it by the brake cylinder....but I don't see it! Or its under the car on the transmission? So my question is where do I put oil for the clutch?...oh.....and it still catches all I know it's not the tranny? Please help me!!!!

Posted by on

  • Flora1 Dec 17, 2008

    I noticed a slight chirpping sound, prior to the grinding noise. If I am in neutral and barely tap the clutch and makes a grinding noise. The grinding noise also happens everytime I shift gears. If I have to work on the clutch, is this an easy fix?


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

You are referring to the clutch master cylinder it takes brake fluid. it is closer to the fender by master cylnder. sounds like you have a release bearing going bad

Posted on Sep 15, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Ford mustang clutch

Might be the pressure plate .

Apr 01, 2014 | 1996 Ford Mustang

1 Answer

Hard to shift into second, 2nd

Sounds like the clutch could be going, or the transmission has been beaten on an is getting bad. Try a new clutch first.

Jul 23, 2012 | 2006 Ford Mustang

1 Answer

I have a manual transmission in my '04 Mustang. When I begin to depress the clutch, an odd grinding sound starts, not loud but enough to warrant concern. As I drive, the car sounds fine. Switching gears...

Worn throw out bearing, replace or the problem may damage other components. This requires dropping the entire transmission. this bearing sits between the clutch pressure plate and clutch slave assembly. When the clutch pedal is pressed, the bearing makes contact with the spinning clutch pressure plate. If defective, grinding/squealing noises may be heard. If the bearing fully fails, loose debris may damage other components. Replace immediately!!

Dec 11, 2010 | 2004 Ford Mustang

1 Answer

I have a 2002 mustang v6 5 speed when i push the clutch pedal in the car wont crank

your clutch safety switch, located at the pedal, is loose or malfunctioning.

Nov 03, 2010 | 2001 Ford Mustang

2 Answers

I have a 2001 Ford Mustang, v6 3.8 5 speed manual

The clutch is not fully releasing. You can try putting it into some other gear first, then rapidly moving to first gear, but really, you need to either adjust the clutch, or get it repaired.

Jul 07, 2010 | 2001 Ford Mustang

1 Answer

My transmission makes noise until I depress my clutch

sounds like the main shaft bearings within the gearbox itself. i would of said the release bearing but u already changed it. the main shaft doesnt spin with the clutch pedal pressed. check for oil leaks and check the oil level in the gearbox.

Jun 20, 2010 | 1993 Ford Mustang

1 Answer

Blowing 20 amp fuses

sounds like the fitter that changed the clutch has damaged a wire ,take it back under warrenty

Aug 04, 2009 | 1994 Ford Mustang

2 Answers

Noise in 2004 Ford Mustang V-6, Manual Transmission

Check the rear suspension bushs for looseness wheel could be pulling to and fro when under power. The noise is probably due to the rubber bush completly disintegrated and the axle to body insulation has gone making the body a big megaphone

Mar 11, 2009 | 2004 Ford Mustang

Not finding what you are looking for?
2004 Ford Mustang Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

71694 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides