Question about 1995 Geo Tracker

1 Answer

95 geo tracker ;;the trans transfer case has a vac /rubber line

Where does this hook up ? is it just a vent ? it goes up to rt behind the engine i cant find a place to connect it do u know??/

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

What is THis?

follow it , tell what connects to.?

there are 3 vents on kicks.
1 for each axle and 1 for tranny.
keeps water out when fording streams.

be brave , follow the tube and learn your car.

Posted on Apr 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What transmission interchanges with a 1991 Geo Tracker 4 x 4


Have a salvage yard use their cross reference book to tell you this.

May 21, 2016 | Geo Cars & Trucks

1 Answer

CAN YOU REPLACE A 1995 GEO TRACKER ENGINE WITH A TRACKER ENGINE WITH A CRANK SHAFT SENSOR???


what years? her ill give examples (no 1.8L sports)
in each case keeping original in/exh manifold of origional
this is called, a Long block swap......!
96 to 95 16v ok ( the crank sensor just sets there, doing zip)
96 to 95 8v no go. ( it will run by ECU while have fuel mapping)
95 8v to 96 16v no go ( missing crank sensor and mapping issues)
95v 16v to 96 16v,(missing crank sensor, move it.)

and you can swap any with harness and ecu. and manifolds.

see swaps here
http://www.fixkick.com/SWAPS.html#G16Bswaps

and links to near infintate swap data.

Feb 20, 2014 | 1995 Geo Tracker

1 Answer

How to find iat sensor for 1995 geo tracker


old post.
some dont have it , 92/93 , 16v MPI
the 95 does,
the 8v is just behind the engine thermostat housing
the 16v is in the air cleaner box.
both are seen here.
8v click real photo here
16v click MAF sensor link. see part 39 there.

http://www.fixkick.com/find-parts.html

Nov 27, 2013 | 1995 Geo Tracker

2 Answers

I have a 95 Geo Tracker automatic the problem is I have to heat my car for 45 min before I can even think of driving it for some reason my car doesn't want to shift at all if it is cold does any one know...


I had the same probem with my 95 geo. Turns out it was the transmission. The second cluth housing was so full of the normal metal bits of auto trans that the clutches would't hook up untill it warmed up. Adding TransX helped but thats a bad idea long term. Just got done rebuilding it.

Dec 20, 2010 | 1995 Geo Tracker

2 Answers

Trans part number for trans filter for 95 goe tracker.


Hello! Purolator filter with gasket...Part # P1149...See picture below...Guru..saailer

saailer_27.jpg

Dec 07, 2010 | 1992 Geo Tracker

1 Answer

Can I tow a 1994 Tracker 4X4 5 spd on all 4 wheels, what do I have to do so no damage


It will be fine to tow it on all 4. Put the transfer case in Neutral and the trans in neutral.

Aug 07, 2010 | 1995 Geo Tracker

1 Answer

1992 geo tracker pops out of 4 high


this could be a bad shifter, with bad platic tip parts
allowing it to rattle too much and pop out
to
bad detents and springs in the shift tower for the shifting railes
ore bad bearings in tranny ,
cracked synco in 4th. (no you just checked it)
the trans fer case has nothing to do with the 5sp box.


Mar 19, 2009 | 1991 Geo Tracker

1 Answer

95 Geo Tracker AC line


Question: Is fitting leaking at the compressor or at the rubber hose end.

If leaking at the compressor hard line fitting. Try replacing "o"ring.
If leaking at the rubber hose end. Remove line and take to a HVAC shop that can replace "barrier hose (rubber hose using your fittings)

Any repair will require discharging the system.

I have a 94 tracker with hoses leaking. I would recommend replacing the rubber hose sections on both suction and liquid lines at the same time. You will have to discharge the system for either repair.
I would also recommend replacing all "o" rings accessible at this time along with a receiver dryer.

I work in the Auto parts sales for a large after market parts supply company and have found that hoses are not available from anybody, including a dealer for my 94 tracker. The system is very expensive to repair if you can find parts.

Hope this will help.

Oct 27, 2008 | 1995 Geo Tracker

Not finding what you are looking for?
1995 Geo Tracker Logo

Related Topics:

378 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...