Question about 1983 Toyota Land Cruiser

2 Answers

Auto electrical hi, i'm looking for a electrical diagram for a fj40 series 1978 model must have external voltage regulator with a 6 plug connection, plus 1 axcilary wire. thanks.

Posted by on

  • 1 more comment 
  • boothsinborn Sep 15, 2008

    2F engine

  • boothsinborn Sep 15, 2008

    paul......your answer is unsatisfactory........alldata does not have the information i need. i have looked in their site..can you do better..

  • boothsinborn Sep 16, 2008

    no,,,, i'm sorry,, ih8 does not have what i want..i've been in there site many times, there is one possible diagram but its not readable.......i thought you guys were the experts ,,,not just a redirectory...your site said if i was unhappy with the answer, i could ask for my refund....i would like to do that.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

My Haynes manual I use all the time for my '78 fj40 has a wiring diagram. I can FAX to you.

Posted on Feb 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

What engine?

Posted on Sep 15, 2008

  • 1 more comment 
  • paul erickson
    paul erickson Sep 15, 2008

    full wiring diagrams and all repair information can be found at alldata.com
    thanks
    paul


  • paul erickson
    paul erickson Sep 15, 2008

    im sorry i use alldata all the time but not much for toyota . so it suppries me that its not there. here is a place that is just for toyota these guys are great and can help
    http://www.ih8mud.com/
    hope this helps


  • paul erickson
    paul erickson Sep 16, 2008

    i contacted all data and they were supprised that i thought that they didnt have the diagrams.
    bob minske from support says that they do,
    who told you they didnt?


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Ford Escape: High beams will not work. New bulbs, no blown fuses and replaced the turn signal combo. What next? Also, found that the fog lights don't work. New bulbs and fuses aren't blown.


Hey Arthur , having a tough time ? Before replace parts testing the electrical circuit would be the right way to try an fix this problem ! There are videos on youtube for basic electrical trouble shooting , not just looking at fuse's but using a volt meter to test for B+ voltage through out the whole headlamp Hi beam circuit . Also how to read a wiring diagram some you know points to test . You can find free wiring diagrams at http://www.bbbind.com/free_tsb.html ! Electrical Series Tools Theory Of Auto Electrical Diagnosis and Repair There The Trainer 29 Understanding How Electrical CIrcuits Work and How to Test...

Oct 28, 2016 | 2004 Ford Escape

2 Answers

Need to know were the voltage regulator is on a 1987 ford motor home with a 460 engine


The voltage regulator is built into the alternator; it's not mounted externally.

Oct 20, 2011 | Cars & Trucks

1 Answer

I have a 93 jeep grand cherokee changed altenator but still wont charge


If no damaged wiring is found, it's most likely an internal fault in the ECM (Engine control module, computer, PCM, ECU, whatever you want to call it, it goes by many names)
The Voltage Regulator is built into the ECM on virtually every Chrysler product (including Jeeps) after 1987 or so. And it is prone to failure. If it does fail, you either have to replace the ECM or install an External Chrysler Voltage Regulator, which requires some wiring harness modifications and a few parts that can be purchased at your favorite auto parts store.
To do the External conversion, you'll need :
1 Chrysler Voltage Regulator (virtually any Dodge/Plymouth from 1970 - 1986. It's best to order one for a 70's 4x4 Truck with a 318 engine though, to avoid any possible mix ups)
1 Chrysler Voltage Regulator Pigtail (this is the plug that connects to the regulator)
Roughly 10 feet of 14 gauge wire, possibly less, depending on where you want to mount the regulator.
Most, if not all Regulators now include a wiring diagram in the box, for this purpose, just follow the diagram and match up the field wires on the alternator with the ones in the diagram. On a '93 Jeep one field wire should be Blue, the other should be Green.

Aug 23, 2011 | Jeep Grand Cherokee Cars & Trucks

2 Answers

How to connect a new era alternator voltage regulator wiring diagram.Or a schematic diagram of the charging system.


knowing the color codes can be a great help..usually in 12v reg system,from the regulator there are 6 white wire having a stripe codes,blue means neutral,green means field,black means ground to body,white means hot wired to +12v,yellow means to bat charging indicator going to instrument panel and finally red means to ignition....and always secure the regulators case to ground.

Jul 19, 2011 | Isuzu i-Series Cars & Trucks

1 Answer

I have a delco alt using a 4 wire plug. this is the type that has a jog in it towards one end not the straight type. WHAT is the model alt


Down load a service manual for your vehicle from this website

It will describe it by model and the voltage regulator yours has

http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 02, 2010 | 1978 Chevrolet C1500

2 Answers

Hello i have a 1978 280z change the alternator still not charging lookin for the voltage regulator cannot findit


Should be on One SIDE Under Hood or Firewall A BLACK or SILVER BOX with Approx 4-6 Wires on It's PLUG

Oct 04, 2009 | 2006 Datsun 210

2 Answers

Car Voltage Regulator Connection


Hi
The only thing that I need is the diagram on how to connect a voltage regulator (12 V), car unit
on my wind generator motor which my produce more than 12 V, according to the wind speed.

Sincerely

Nestor

Sep 24, 2008 | 1988 Daihatsu Charade

Not finding what you are looking for?
Cars & Trucks Logo

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...