Question about 1988 Chevrolet Silverado 2500
The first thing would be to trace all your wires at first. make sure none have been burned or cut. I agree get a fuse tester but for the main part. trace all your wires first. i had no tail lights on my 89 s-10. this was caused by my wires breaking from their harness and touching the exhaust. every time i would put a new fuse it would blow because it was shorting to ground when the wire touched the exhaust. my advice would be trace the wires.=)
Posted on Feb 17, 2009
What if fuse keeps blowings
Posted on Feb 02, 2009
My truck did that these trucks have a problem with radio connector on the harness under the dash my mechanic cut the connector off and hard wired it back. works fine since then.
Posted on Oct 09, 2008
It's one of your fuses that burned out. buy a fuse tester at any auto parts and test all your fuses. when lights and horns fail as a group, it's usualy the fuse that protects these multiple parts that's gone bad.
Posted on Sep 15, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 17, 2016 | Cars & Trucks
Sep 27, 2016 | 2000 Dodge Caravan
Nov 26, 2013 | 1984 Pontiac Fiero
Mar 18, 2013 | Cars & Trucks
Feb 16, 2012 | Cars & Trucks
Mar 07, 2011 | 1995 Kia Sephia
Feb 25, 2011 | Chevrolet Caprice Classic Cars & Trucks
Jan 28, 2010 | Chevrolet 1500 Cars & Trucks
May 06, 2009 | 1998 Chevrolet Cavalier
210 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: