Question about 2003 Jeep Grand Cherokee

5 Answers

2003 Jeep Cherokee Door Panel Electrical Issue

The drivers door panel instruments work intermittently. It seems like there is a short in the wiring in the door to control the windows, locks, etc.
When I open the door to a certain point, the electrical will cut in and work, and then other times it will not. When I am driving, there is a clicking noise coming from the panel.
Any ideas before I take it to the dealer?

Posted by on

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

Hi
i had the same priblem myself, its an easy fix if your any way handy.
the problem is the main power wire to the drivers door is broke or almost broke (due to switches working when door is closed) between the body off the car and the door you will find a rubber boot,slide the boot back from the car body side and you will find that the thick wire is broke due to the door opening and closing all the time. just add a small piece off cable the same gauge about 2inches (to allow movment in rubber boot) and solder both ends to join. that will solve your problem. ive fixed at least 5 off the jeeps with same problem. try it to see.

mark

Posted on Oct 19, 2008

  • ymriddick21 Jan 30, 2011

    the black sleeve is difficult to get off but I pinched what was inside and sure enough I tried the locks with the door wide open and it works. i just have to figure out how to remove the sleeve and replace that wire.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Power windows and power mirrors will not work.is there a fuse you can change? 2003 jeep grand cherokee limited

Posted on Jul 29, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The central locker would not work. the left hand side windows would not close or open, the right hand windows would close and open only when the drivers door is closed

Posted on Oct 15, 2008

Is this the rubber piece with all the wiring inside that pops off the door. There are a few wires inside that are taped together with electrical tape. I've retaped them all, but it is pretty hard to access to see if any others are broken. 
Any way to gain better access to check?

Posted on Oct 14, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 475 Answers

Between the door and "A" pillar is the door wiring harness.
You probably have some broken wires there.

Posted on Oct 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Power windows do not work


It sounds like it could be one fuse or several. It also could be your door control module.

May 08, 2012 | 2004 Jeep Grand Cherokee

1 Answer

On the driver side door control panel windows,door locks,and mirrior stop working.


There is a rubber boot located between the door and the body of the jeep. Pull this boot back and check for wires that have been pinched into. Mine was the thick black wire. Splice it back together with **** connector and black electrical tape. Worked like a charm. This is a common Jeep problem.

Feb 25, 2011 | 2004 Jeep Grand Cherokee

5 Answers

Driver side door switches are not working. Dome


My power locks, windows didn't work and the dome lights would not turn off after closing the door. I removed the black boot that was attached to the drivers door by lifting upward and pulling away from the door. A heavy gauge black wire was broken. I removed about 3/16" of insulation from both ends of the broken wire and connected them by using a connector that both ends are placed in to and then "crimped" both ends so the broken wire made contact with each other and everything worked perfectly! The hardest part was replacing the boot. Total cost to fix is $0.50.

Jan 14, 2010 | 2004 Jeep Grand Cherokee

1 Answer

Computer csuses problems. Electrical problem


this is a broken wire in the wiring harness in the door opening and is repairable by soldering it back together

Aug 09, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Jeep locks, windows, and overhead information panel not working


you have a pinched or broken wire in that wiring harness that youre talking about check carefully.

Jul 06, 2009 | 2004 Jeep Grand Cherokee

1 Answer

2004 Jeep Lerado - Drivers Side Power Windows & RemoteKey Issue


A wire in the rubber boot in the door jam is broken,i found it in my jeep GC 04 yours shouls be the same..

Dec 15, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Jeep Grand Cherokee Logo

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...