- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes, it's most likely a faulty brake light switch. When you depress the brake pedal, it disengages the shifter. Fist thing to do is check your fuse box to make sure there are no blown fuses. If all the fuses check Ok, then check the brake switch, it should be located under the dash just follow the brake pedal all the way up into the dash and the switch should be there next to the pedal. Check for power at the switch to make sure that it's faulty. One of the wires should have 12 volts. If none of the wires carry 12 volts, then theres a blown fuse somewhere, But if there's power at the switch, then replace the switch and it should work.
HI IT WAS LOCATE IN UPPER OF THE BRAKE PEDAL BEFORE YOU CHANGE IT CHECK FOR :-
STOP LAMP SWITCH AND ASCD CANCEL SWITCH CLEARANCE 1. Twist and pull to remove switch. 2. Pull up on brake pedal pad and hold. 3. Insert switch into retainer until switch plunger is completely depressed. 4. Turn the switch until it locks into place in the brake pedal bracket. NOTE: When turning the switch to lock into place, the switch backs off the stopper to the correct clearance automatically. 5. Release the brake pedal pad.