Question about 1987 Chevrolet S-10 Pickup

2 Answers

Engine replacement Is it possible to drop the engine from a 1989 Chevy S10 4.3 into a 1987 Chevy S10 2.8 engine compartment. Would the transmission match up to bolt up to the engine? Have both vehicles. The 87 body is great with a weak engine. The 89 body is shot with a great motor. Thank you.

Posted by on

  • rancher1943 Sep 14, 2008

    Knew there was a book salvage yards used, didn't have the name for it. Thanks!!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

You will ned the trans from the 89 as the 2.8 uses a different bellhousing because it was a transverse mounted engine in gm front drive cars whereas the 4.3 uses the bolt pattern from chevy full size vehicles. 60 degree vs 90 degree bellhousiing

Posted on Jan 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

The best publication out is printed especially for this its the HOLLANDERS INTERCHANGE BOOK this is the bood and program wrecking yards use to know which parts fit which cars and for how many years.

Posted on Sep 14, 2008

  • Randy Harkins
    Randy Harkins Sep 14, 2008

    No problem good luck. Thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is transmission module located on 2002 Chevy siverrod truck 5.3 engine


Transmission control module is part of the PCM - powertrain control module . Engine an transmission module all in one . It's in the engine compartment .
Powertrain Control Module (PCM) 4.8L,5.3L,6.0L
Near the left front inside the engine compartment

Apr 24, 2017 | Cars & Trucks

1 Answer

2007 chevy equinox license plate light won't work after bulb and fuse replacement


Do the park lamps work ? license plate lights get power from same fuse ! Check ground wire ! use a volt meter an do voltage drop test ! Voltage Drop Testing The fuse for the license plate lights is in the under hood fuse box -engine compartment ! fuse #12 RT PRK LAMP 10Amp .

May 23, 2015 | 2007 Chevrolet Chevrolet Equinox LT

1 Answer

How do you change transmission fluid/filter in a 1989 chevy van


drop trans pan and remove filter carefully, remove drain plug on convertor and drain reinstall and add removed amount of fluid with new check level with engine running in park

Feb 21, 2015 | Chevrolet Cars & Trucks

1 Answer

Does replacing the clutch and preasure plate on


The clutch can be done by unbolting the transmission from the engine after removing the drive shafts, support mounts and linkages and then sliding the transmission to the side resting between the subframe and inner guard. There is not a great deal of room to work with but the job can be done without removing the engine.

Apr 26, 2010 | 1989 Mazda 626

2 Answers

I need to replace the rear main seal on my 95 chevy pickup with a 350. do i need to drop the tranny?


Yes, either pull the trans or pull the engine. No way to get in there with out having one of the two out!
FYI it's very rare for a rear main on that engine to leak, Most all of the time it's the oil pan gasket or coming from higher up like a valve cover or the intake gaskets!

Oct 21, 2009 | 1995 Chevrolet K1500

2 Answers

1989 Chevrolet C1500 with 5.7L V-8. Engine dies


don't know for sure but my 98 had simmilar problems and it ended up being the ignition switch,not the key switch but the actual ign switch.worth a try.

Jul 28, 2009 | 1989 Chevrolet C1500

1 Answer

Will a 1989 kblazer transmission fit a 1993 k1500


If you are asking will the transmission will bolt up to your engine the short answer is yes however you may have to modifly the transmission depending on a number of factors the transmission in your 93 could be the electronic shift the one in the 89 might be manuel **** but you can check that out before you put it in.

Mar 18, 2009 | 1993 Chevrolet K1500

1 Answer

Instantanious ignition drop out


chek for good engine graund ,inspeckt body graund to.bed graunds on motor and bady will cose lat of hedicks

Mar 12, 2009 | 1989 Chevrolet C1500

2 Answers

Where is transmission fluid and stick


In my 1989 E-150 I had to remove the air intake and air filter compartment to get at the transmission fluid filler. Not too difficlut to do.

Feb 28, 2009 | 1989 Ford Econoline

Not finding what you are looking for?
Cars & Trucks Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...