Question about 2004 Ford Taurus

1 Answer

2004 ford taurus

Where is the pcv valve located ?

Posted by on

  • Anonymous Mar 14, 2014

    Where is the 2004 Ford Taurus computer moduel located

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

You're pcv valve (positive crankcase ventilation valve) is located in the end of the cam cover it will have a hose connecting it to the intake manifold.

Posted on Sep 16, 2008

6 Suggested Answers

  • 3 Answers

SOURCE: PCV valve location

if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

Posted on Nov 07, 2008

Monster80
  • 460 Answers

SOURCE: What is the location of the PCV valve on a 2005

Its in the back of the intake.It points straight towards the windshield way.It has a black hose that comes off from it..If your standing in front of the car looking down at the motor at the middle of the motor look straight back and down just after the intake starts to round down you'll see it..

Posted on Mar 30, 2009

  • 115 Answers

SOURCE: 2004 ford f150 Heritage.I cannot find the PCV

The PCV valve is located on the passenger side valve cover towards rear of engine.

Posted on Sep 05, 2009

  • 76 Answers

SOURCE: Where is the PCV valve in a 2004 ford taurus?

its under the intake manifold on the drivers side near the camshaft syncronizer. its a little tough to get to. may have to remove the intake boot

Posted on Oct 03, 2009

  • 4 Answers

SOURCE: Where is the PCV valve

it's kind of hidden- left side of vehicle, on left side of rear valve cover.

Posted on Oct 05, 2010

Testimonial: "Thank you! I will try and find it this evening to replace the PCV"

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pcv location ford escape 2010 2.5 gas engine


The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
The PCV valve sits in the crankcase vent oil separator.

May 16, 2014 | 2004 Ford Taurus

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

Need to locate pcv valve on 2001 ford ranger 3.0. please help


PCV valve is on one of the valve covers...
It has a 1/2 to 5/8 inch rubber or plastic hose attached to it.
Usually on the top of the valve cover, and close to one end or the other.

Aug 01, 2011 | 2004 Ford Taurus

1 Answer

Where is pcv valve located on 2005 taurus


It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

Jan 27, 2010 | 2004 Ford Taurus

1 Answer

Where is pcv valve located on 2005 taurus?


From the front of the car and starting at the throttle body, locate a large rubber hose coming out of the bottom of the throttle body, this hose comes straight down, then bends towards the front of the car. A plastic pipe connects to this rubber hose and the plastic pipe continues forward, then bends to the passenger side and dives under the wiring harness a few inches and connects to a 2" long rubber hose which is then connected to the PCV. The PCV is made by motorcraft; part # ev-243 or ev-268. Ev268 has a metal hose wraped around it; This is used for coolent on other models (not yours). Bend it slightly and pull it off. The valve has square sides. Use long nose pliers to reach under the wiring harness and turn 1/4 turn counterclockwise to remove and opposite to install.

I think Ford floated the PCV in space and then built the entire car around it. This is, perhaps, the worst PCV location I have encountered.

FixYaWIZ.....saailer@att.net

Dec 08, 2009 | 2004 Ford Taurus

1 Answer

Need location diagram of PCV valve location


believe it is located on passenger side valve cover half way back. if i'm mistaken you could go to autoparts store and check a haynes manual

Dec 27, 2008 | 2004 Ford Taurus

1 Answer

I need to know the location of the PCV valve in a Taurus 2004?


the PCV valve normally sets in the valve cover gasket on the right side

Nov 27, 2008 | 2004 Ford Taurus

Not finding what you are looking for?
2004 Ford Taurus Logo

Related Topics:

717 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...