Question about 1993 Toyota Previa

1 Answer

Started electrics I have fitted a new starter,recon, to my estima2.2 d 1992 auto. on the first journey the electrics failed to the dash, no ign lights and no start. All fusable links have been checked allong with the fuses but no solution has been discovered. anybody help???

Posted by on

  • mikefee Sep 15, 2008

    thanks for the tip. currently 150 miles from home and the car .Iwill check suggestions on my return

    Mike

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 726 Answers

Starter motor has nothing to do with the dash u might have pulled a wire some were
so

1 check positive to battery then to starter
1 check earth and the wire clip on the starter

Posted on Sep 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I start the car and the starter stay ingage I turn the ign switch off then try to start and the same thing happened few times until it start normal do you think its the starter / starter realy or ign


I would suspect that the solenoid contacts need replacing as they may be burning together. Pull the starter and have an accredited auto electrician bench test it.

Mar 11, 2014 | 2005 Chevrolet Malibu Maxx

1 Answer

Light Security Stays on after code learned


that\'s the thing about new cars. they suck. all this electrical this, electrical that, you are sheit out of luck bud. junk it and buy something older that most people know how to fix.

Oct 24, 2013 | Cars & Trucks

1 Answer

My car wont start i check the starter its ok battery is good. it wont make a clicking sound nothing


with ign power on does the dash lights/gauges come on? if so than do you have power to the ign side of your starter solenoid? might be a fusible link blown that goes to the ign from the starter, get a test light and see where the power ends.

Sep 06, 2011 | 1992 Buick LeSabre

2 Answers

Ok i got a 91 honda accord ex auto and i have power to the starter and a new battery. i already took the starter out and had it tested at my local auto store and it tested fine. i checked my fuses and none...


try shfting the lever to nutral if it starts the switch is bad
if you still cant hear nothing put a test light at the starter selenoid
if it does not light check for starter relay usually found in fuse box
not to sure on honda

Mar 30, 2011 | 1991 Honda Accord

4 Answers

I have a 1976 gmc pickup that i can not get to start. I have replaced the ignition switch and the key switch. I had the starter checked and it is okay. There does not appear to be any power to the starter....


you need to check the ign wire to the starter for power. check wire under dash for power and if you have to run a new wire from ign switch to starter selonoid. switch is on top of steering column under dash.

Jan 29, 2011 | Chevrolet 1500 Cars & Trucks

1 Answer

Tried to start the 2003 Malibu, only get a relay clik. battery is new. after 2 or 3 starts, the starter goes to hell - have put two reman starters on. Auto parts check them when I bring back in and...


Hi, is it possible your starter is not disengaging from the flexplate? This could cause both the alternator and starter to fail. Pull the starter and check the return spring on the gear. If the spring is good, you may want to try putting a couple of shims in between the starter and transmission housing. It sounds like your current alternator is also failing if the battery light is on.

Jan 05, 2011 | 2003 Chevrolet Malibu

1 Answer

2000 audi a4 starter gremlin


your barking up the wrong gum tree witht the starter motor ,you have an electrical supply problem on the battery terminal area with more than one wire connected or a dodgy earth cable from the engine to the chassis .i would be inclined to check and fit another earth cable from a good connection on the engine -(bell housing) and run it back to battery terminal to eliminate all posibilitys .before anything else ,make you own if you have to but only use copper cable .this is my last question for tonight ,have to go pick er indoors up from work now

Mar 28, 2009 | 2000 Audi A6

1 Answer

W reg audi wont turn over after fitting new starter motor


IF YOUR ENGINE WON T TURN OVER AFTER YOU FITTED A NEW STARTER MOTOR..I WOULD START WITH THE BATTERY MYBE DEFECTIVE NOT HOLDING FULL CHARGE....THEN CHECK WIRING.....GET BACK TO ME IF YOU NEED MORE HELP !!

Mar 15, 2009 | 1998 Audi A4

Not finding what you are looking for?
1993 Toyota Previa Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...