Question about Toyota 4Runner
Hi we have a granvia converted to a motorhome but cannot locate the tyre pressure required, can anyone help please, the original van was imported from Japan I have had to select 4runner as the programme would not let me proceed without selecting something
SOURCE: hub wont come off
There should be a small slot on the bottom of the brake backing plate,they should be covered with a small rubber plug,remove the plug and it will allow access to the brake adjuster, back the adjuster off and you should be able to remove the hubs.
Posted on May 30, 2009
SOURCE: 1KZ-TE Toyoto 3L TDi in Granvia
Install fuel pressure guage, clamp off return side and verify the exact pressure it is producing to the injector rail. Checkmanufacturer specs. If it is not sufficient. Replace pump.
Posted on Aug 27, 2009
Remove the dash clocks 5x philips srews.
In the back of the clocks there is a screw that needs moving from one hole to another, they are marked t- belt, keep looking their fairly small
Posted on May 02, 2010
Tips for a great answer:
Apr 26, 2016 | Toyota Cars & Trucks
Feb 23, 2016 | Toyota Cars & Trucks
Feb 16, 2015 | Toyota Cars & Trucks
Aug 26, 2011 | Toyota Previa Cars & Trucks
Jul 12, 2011 | Toyota Passenger Cars & Trucks
Sep 02, 2010 | Toyota 4Runner Cars & Trucks
Aug 25, 2009 | Toyota Passenger Cars & Trucks
523 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: