Question about 1999 Daewoo Lanos

1 Answer

Removal of "shading film" from car windows.

Shading film (plastic) is peeling off the windows of a car (2002 Taurus) I purchased. Some is too stubborn to remove; a very sticky residue remains where it is removed, There seems to be serious resistance and noise in the door mechanism as the automatic window raises and lowers. Please advise, Thanks

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 63 Answers

There is a widow film solution sold at most part stores its good for putting the stuff on and taking it off also use a razor blade and scrape it after spraying it down with solution

Posted on Sep 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can't get the passenger door open the inside and outside handles won't work can't raise the button up to unlock the power button won't raise the button either other doors work

If I remember correctly, that year Taurus still had the old style lock buttons by the window glass. You should be able to use a sharp object and dig into the plastic door lock by the window. Knife, box cutter, anything that will gouge the button enough to get a purchase to pull the lock up. Pull it up, open the door, then remove the door panel to find out what's wrong. Probably open circuit in the door wiring or broken clip for the rods.

Ya could find someone with a slim-jim who knows how to hook the rod to unlock the door. Ford dealer? Locksmith?

Apr 03, 2015 | 2002 Ford Taurus

3 Answers

Window tint shade

there are various tyoe if tint you can apply to your windshield, specific brand i would say is 3M, either reflective or dark, or light they have it, you local car accesories shop has it too.

Aug 02, 2008 | 1995 Volkswagen GTI

2 Answers

Number plate film peeling

I'm not sure if this will work for the Golf but check out this carbon fiber license plate protection product - it might work for your problem
Hope this helps:)

May 18, 2014 | 2009 Volkswagen Golf 5

1 Answer

How do you replace the window regulator and motor on the driver front side on 98 dodge grand caravan

Remove the two Phillips head screws that hold in the power master switch in the door. Gently pry it upward. Push the red clips aside on the plugs and squeeze the release on the plug and pull them off. Remove the screws from inside the door panel. Lift the panel up and away. Peel back the plastic to reveal the inner door. Duct tape the window over the upper frame a few times to keep in up. Peer inside the door for two metal clips that hold the regulator to the window and slide them out. Unbolt the front and rear vertical tracks that slide the window up and down. Take out the three torx head bolts that come through the door and hold the motor in place. Check tor plastic anchors (ribbed pointy things) that hold the cables (from making noise) going from the front and rear vertical tracks. Twist and wiggle the tracks and motor out the hole at the bottom rear of the door. It's a little stubborn to finagle out, but it'll come. Patience will overcome.

Mar 14, 2010 | 1998 Dodge Caravan

1 Answer

How are the lugnut studs replaced on the hub

Remove the tire. Remove the hub. The hub will likely be stubborn. Tap it from all angles to get it loosened up. Then tap the stud out out with a hammer and punch.

Dec 07, 2009 | 2002 Ford Taurus

1 Answer

How do i put in the drive side door window

First remove the door panel, peel down the water barier, you will see three star screws remove these, then remove the window motor, take themotor apart, replace the plastic plugs with ball bearings, repact the motor, then remove the rivits holding in the winidow regularot and the window glass. To do this you need /14 punch, punch out the rivits, then using 1/4 drill drill out the aluminum plugs, replace these with 1/4 boltd and lock washers. Replace the window but do not over tighten the window or it will go up slow. You can purchase the regulators on line much cheaper than purchasing them from a shop. On Line around $18-30. At an auto shop $60-70. Hope this is helpful.

Sep 10, 2009 | 1991 Ford Thunderbird

2 Answers

Windows tint

If it's factory tint, it is imbedded in glass and can't be removed.
If it's add on tint, it is just a plastic film on inside of glass.
Call a tinting shop and ask what chemical to spray on film to soften adhesive, or ask for removal quote too

Aug 26, 2009 | 2002 Mercedes-Benz C-Class

2 Answers

Window tint Glue Removal

  • Warm sunny day
  • Tarp
  • Large plastic garbage bag
  • Undiluted Ammonia
  • Windex (a glass cleaner)
  • Paper towels
  • Fine steel wool
  • Razor blades

The difficult thing about removing tint is that most film is constructed of two layers of tinted polyester. When you try to peel the film off the glass, the top layer will usually pull right off leaving the second layer behind. This second layer will not peel off, it will just flake and tear like a price tag.

Step 1:
To over come separation between layers you must soften the adhesive so that both layers peel at the same time. This is very important, if you peel the just the top layer, you may as well just use razor blades as there is no way to peel the second layer off without picking at it for a few hours. You MUST try to peel both layers at once.
You are more than likely to damage one or more of your defroster lines, when this happens, the cut line will not work anymore. Some cars have radio antennas mounted alongside the defrosters made of the same material. If you damage these, your radio antenna will not work! Be careful! Taking it to a tint shop to be done greatly increases the odds of saving the lines, but even a tint shop can not promise to save your lines, sometimes the film is just to far gone.

Mar 27, 2009 | 2003 Honda Accord

1 Answer

Rear window on Taurus wagon will not open.

SECTION 501-11: Glass, Frames and Mechanisms 2002 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Liftgate Window Glass Removal and Installation
  1. Remove the rear wiper motor. For additional information, refer to Section 501-16 .
  1. Disconnect the two rear window defogger electrical connectors.
  1. Remove the two liftgate support cylinders.
    1. Remove the two E-clips.
    1. Remove the two liftgate support cylinders.
  1. Remove the LH and RH nut and liftgate window glass.
  1. NOTE: Transfer components as necessary.
    To install, reverse the removal procedure.
  2. do not overtighten the nuts. just a little more than finger tight. Or window will explode.
This is for movable glass.

Mar 12, 2009 | 2003 Ford Taurus

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

77932 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8830 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides