Question about Mitsubishi Eclipse

3 Answers

Engine code p1610 - Eclipse Mitsubishi Cars & Trucks

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 60,875 Answers

Mitsubishi: Immobilizer System Malfunction, check the ECU for this system, you have a no start correct?

Posted on Sep 14, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

CODIGO 1610 EL MOTOR NO FUNCIONA ME PODRIA DAR LA SOLUCION

Posted on Nov 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Hi i have the same problem it toke 3 month to find out
i have change many part ecu immobilizer car key you name it

hear is the solution change the wire to the immobilizer
then try start the car now....my car start at ones no problem any more.......
in the junk yard i find one to my hyundai sonata it is white then i clip the wires and take home and sample with plugs
hope this will help you

Posted on Aug 14, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have cod p1615 but the car not runing ignition coils dont have power and injecter dont have power


“ON” WITH DTC P1615 OR P1614 OR P1610 STORED AND ENGINE MAY NOT RESTART WHEN COLD
The MIL is “ON” with any of the following codes stored:
• DTC P1615 or P1614 or P1610.
AND
The engine does not restart in the following conditions
• The vehicle sat for several hours (cold soak) with outside temperatures below -12? C
(10? F); and
• The vehicle was then driven for a short period of time (5-10 minutes); and
• The engine was then turned OFF for a short time (5-10 minutes); then
• The engine cranks but will not start and the MIL illuminates with DTC P1615 orP1614 or P1610

This is a computer issue and needs to be fixed at the dealer are you still under warranty?

Read more: http://www.justanswer.com/nissan/3fwbk-code-p1615-nats-malfunction-means-fix-it-can.html#ixzz3aGwlCm4u

May 16, 2015 | Cars & Trucks

1 Answer

Suzuki swift 2011 not start code p1610


not start, so, car cranks, ok and will not start, , RIGHT?
That code is from a real scan tool???????
which engine is there, of the 5 or so?
1.2 L I4 (petrol)
1.3 L M13A I4 (petrol)
1.5 L M15A I4 (petrol)
1.6 L M16A I4 (petrol)
1.3 L I4 (diesel)
in what country is car, (1million posts here and not one ever said that)
and varies by guess what?, COUNTRY.

P1610 (is power train code =p)
i have no books on non USA cars. nor access to them
so not saying COUNTRY , forces me to guess engine and codes.
so i did what you failed to do , i searched on FIXya forum
and found this.
my best guess , would be... as per below. (no real FSM)
I see only 1 , a Reno. wrong car, but my online source shows no usa swift data at all. 2011
P1610 is a resulting DTC from the "LOCK MODE" condition which is set for various NATS malfunctions or an improper key being used. It prevents the car from starting (for some period of time, even if the key issue is rectified).To reset a NATS lock mode, a proper key must be cycled three times again to get the car to start
we only have 2001
here
https://suzukipitstopplus.com/Products/1173-2001-swift-service-manual.aspx

sorry

Oct 11, 2014 | Suzuki Swift Cars & Trucks

1 Answer

What is p16ff code for nissan


all of my research keeps coming back to p1610 for the P16ff Code but I am not sure.
The code P1610 is a problem with the NATS, or better known as system of vehicle immobilizer. And this arose out of the following:
-are using a q-key is not registered or not transmitting the code
- BCM or ECM are evil, and
now is in "locked mode"
you can do something quick:
1. Confirms the code q yields
2. EXIT THE LOCKED MODE. If the code is p1610 continues with the following with a copy of the vehicle key:
(1) -Place the switch to OFF
(2) -Place the switch in ON with the key registered(do not start the engine). Wait 5 seconds
(3) -Returns the switch to the off position. Wait 5 seconds
(4) -Repeat step 2 and 3 two more times (being a total of 3 times) (
5) -Starts the engine
with this test and write us if t worked. If this is not the case there will be q enter to detail by checking with the diagnostic charts and other things.
The other code does not exist or does not comply with the structure of a code

Aug 03, 2014 | 2007 Nissan Tiida 1.6

1 Answer

Code p1610 marca este codgo


DTC P1610: Immobilizer syatem malfunction. Probable causes:
1. Faulty sensor or solenoid
2. Damaged or corroded connector terminal contact
3. Wire harness problem. Check for correct voltage, open, short to ground, short to voltage
4. Control unit software needs update
5. Faulty PCM or ECM

May 07, 2014 | 2002 Mitsubishi Montero Sport

1 Answer

How to fix code p1610 on 2002 mitsubishi montera sport


P1610 - SBDS Interactive Codes Possible defective PCM.

Aug 29, 2012 | Mitsubishi Cars & Trucks

1 Answer

CODES P1610 AND P1612


I had both p1610 and p1612 codes pop up today on me when my car decided to just die. i did a lot of trouble shooting and it led me to removing the negative battery terminal which resets the system and bam, car started right up.

Aug 23, 2012 | 2001 Nissan Sentra

2 Answers

2003 Nisson Altima code P1610 and P1612. Anti theft problem how do I reset without taking to Nisson dealer?


P1610=Lock Mode--1 turn ignition switch OFF 2 turn ignition switch ON with registered key. (Do not start engine.) Wait 5 seconds. 3 Return the key to off position. 4 Repeat steps 2 and 3 twice ( total of tree cycles). 5 Start the engine. Does engine start ?? Yes...System is OK. Now system is escaped from LOCK MODE...if no start...Go to 3
P1612 is a lot of testing.......get back to me....

Jun 04, 2011 | Nissan Altima Cars & Trucks

2 Answers

My nissan try to cranck up but it wont start code p1610 and p1612 came out


my nissan altima 2002 wont start the battery is brand new and code P-1612 was found out what does the code mean

May 05, 2011 | Nissan Pathfinder Cars & Trucks

1 Answer

I have 2003 nissan pathfinder,i have this codes p1610, p1614,the cvar don't start


these are codes for the anti theft system.did you use a key to start it other than one you usually use?if im not mistaken p1610 is a difference of key/unregistered key and 1614 means system entered lockout mode because of key.please let me know how you make out.

Feb 08, 2011 | Nissan Pathfinder Cars & Trucks

3 Answers

Code p1610,p1612


Sentra 2003 p1612 code

Sep 06, 2010 | 2002 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...