Question about 1993 Toyota Camry V6

2 Answers

1993 Toyota Camry 4

My brother tried to clean the engine on my 1993 Toyota Camry 4 cylinders. He poured some water on the engine compartment after the car was hot and then it did not start anymore. I changed the distributor cap, the rotor, and then discovered the coil cracked and changed that too, also changed the spark plugs. In the process I removed the distributor from the car and even though I made a mark to align the distributor back to the original position now when I start the car is having a problem and it does not have the "power" needed especially if I turn the AC on.

If one of the spark plug cables plastic broke in the process right by the tip that meets the plug is that maybe a reason or do I need to mess with the distributor some more.

Posted by on

  • Wallace Lopez Sep 15, 2008

    Changed the spark plugs wires and "yesssssss"!!!! Fixed and is running better now than before, thanks.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I had the same problem my car have power so we checked the feul source that goes to the plugs (the fuel filters) and replaced them now it works fine.

Posted on Sep 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 61,037 Answers

I think if you replace that plug wire you will fix the issue, but if they are the orig wires I would just go ahead and replace the set

Posted on Sep 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota Camry 1993 4 cyl water pump failing, have removed thermostat, considering Electric inline pump as replacement as option ? Please advise me of pro's and con's.


i owned the 1995 4 cyl wide body camry till the cooling system failed in heavy traffic and over heat stripped out the head bolt threads in the block

the toyota camry engine designation is a 5S-FE

water pump is driven by timing belt
behind timing belt covers
they have to be removed to get to the water pump

normally timing belt, seals ,tension er pully and water pump are replaced at the same time ..comes in a kit

i dont have the 5S-FE cooling system hot under pressure specs

so I cant answer which inline electric pump pressure is required to work on the 5S-FE


engine repair manual free download pdf
5S-FE 431 pages
http://www.turboninjas.com/camry/eg1.pdf
ENGINE MECHANICAL to page 144
EMISSION CONTROL SYSTEMS
MFI/SFI SYSTEM page 164
COOLING SYSTEM page 238
LUBRICATION SYSTEM page 268
DIAGNOSIS SYSTEM page 296
CIRCUIT INSPECTION page 336
water pump as a part

timing belt water pump kit
water pump
,location on the engine with timing covers removed


e7622159-98af-4a83-8989-bd6dd48bcde3.jpg26279563-dp42dlzfhn4dbdhi1rc14q4e-1-2.jpg26279563-dp42dlzfhn4dbdhi1rc14q4e-1-3.jpg

Sep 10, 2016 | 1993 Toyota Camry

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

1993 toyota camry 4 cylinder runs for 15 minutes and shuts off


i would start buy checking you disturber see if you have spark when it dies

Jan 05, 2013 | 1993 Toyota Camry V6

1 Answer

Firing order for toyota camry v6 1996


the firing order is in fact 1 2 3 4 5 6 the number one cylynder is on the left at the back, as you look at the engine from the front >>
positions of cylinders
-------------
1 3 5

2 4 6
------------

Mar 15, 2010 | 1993 Toyota Camry V6

1 Answer

Lots of heat coming from the motor compartment


Engines do create alot of heat. They operate at 200 degres normally while exhausts can be 700 degrees. This points to the inefficiency of a gas engine.

Jun 05, 2009 | 1995 Toyota Camry

2 Answers

Location of fuel filter on 2004 camry le 4 cylinder


ITS LOCATED ON THE FIREWALL IN THE CENTER

Mar 23, 2009 | 2000 Toyota Camry

5 Answers

1993 toyota camry 4 cylinder will not start


this kept happening to me and it was the erg valve.

Oct 03, 2008 | 1993 Toyota Camry V6

1 Answer

1993 Toyota Camry Wagon 4 cylinder cranks but wont start


this workes with manuals but you can try it. have the car pulled and then try starting it as it is being pulled

Jun 17, 2008 | 1993 Toyota Camry V6

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...