Question about 1995 Honda Civic

2 Answers

Replacing head gasket on 1995 honda civic, require torque specs and secquence

On 1995 honda civic, require torque specs and secquence

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

Posted on Jan 01, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

7.3 ft.lbs Go from middle, to back right, to back left, to front right, to front left. if your standing in fron of your header.  11 or over usually shears the bolt.(if you have stock bolts)
Make sure you dap some rtv on the sharper 4 corners of the gasket where the cam seals are.

James Mac

Posted on Sep 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs for 01 Honda Civic 1.6L VTEC to include intake , exhaust, thermostat housing to head cam pully


try referring to the repair manual. usually always has torque specifications:
http://www.papertownspdf.com/downloads/honda-civic-repair-manual-2000-2005/

Dec 30, 2016 | Honda Cars & Trucks

1 Answer

What are the spark plug torque Specs on a 95 Honda Civic LX 1.5 liter.


Torque Chart - E3 Spark Plugs

e3sparkplugs.com/torque-chart/
The table below lists the torquing specifications for most spark plugs being installed in either cast iron or aluminum cylinder heads. Torque values assume clean, dry threads.

Tech Specs - Spark Plug Cross Reference, Torque ... - Autolite


Nov 25, 2015 | Honda Cars & Trucks

1 Answer

How to replace head gasket


Replacing a head gasket is not a DIY job, unless the person has plenty of experience, knowledge, and the proper tools. The fact that a you would even ask, "how to replace 91 honda civic head gasket?", would indicate that you should not try to do that repair.

To replace a head gasket you must remove the intake manifold, exhaust manifold, valve train, and then the head. This is very involved and requires disconnecting lots of sensors and the ignition system. The head must then be checked to see if it is warped, or cracked, and repaired if necessary. You must then know how to put all this back together and torque all the bolts in the proper sequence. This takes training and skill which the average shade tree mechanic does not have.

If you are dead set on DIYing it, get a vehicle specific repair manual and dig in. Good luck China OBD2 car diagnostic tools wholesale on CareUCar

May 11, 2014 | 1991 Honda Civic

1 Answer

Torque spec on head for 1986 civic si 1.5liter


Help need torque spec for cylinder head bolts 1986 honda civic dx 1.5 pls...

Mar 10, 2012 | 1986 Honda Civic

1 Answer

2000 honda civic sir 1.6 dual cam vtec head torque and head bolt location


The Head bolts are located below the cams, so you have to take the cams out to get to the bolts.
The torque specs for the head bolts in sequence is 20, 40, then end at 63ft lbs. Be sure to apply anti sieze or dip the head bolts in oil, before you torque them down or you might pull out the threads. (Not a good thing TRUST ME!)
Hope this helps.

Aug 10, 2010 | 2000 Honda Civic

2 Answers

NEED FORD 2.2l head gaskets torque chart


Tighten the head bolts 29 to 32 ft lbs , then tighten again to 59 to 64 ft lbs

Apr 17, 2010 | 1989 Ford Probe

1 Answer

What torque spec for chev aveo 2004 cylinder head


18 lb ft+60°+60°+60°+10°

NEW HEAD BOLTS ARE REQUIRED WHEN REPLACING THE HEAD OR HEAD GASKET.

Jul 04, 2009 | 2004 Chevrolet Aveo

1 Answer

I have a 1990 honda civic. I just changed the head gasket I need to know the head bolts torque specs thank you. It is a D 15.


The book say to do it in 2 steps up to 48 ft-lbs. Personally, I would do it in 3 steps, 15, 35, and then 48. Start in the middle of the head and criss cross out to the ends, and repeat.

May 18, 2009 | 1991 Honda Civic

2 Answers

Torque specifications for head bolts 1995 Jetta 2.0


First pass, torque them to 30 Ft Lbs working from the center outward. Then go back again and torque them to 75 Ft Lbs.

Feb 21, 2009 | 1995 Volkswagen Jetta

Not finding what you are looking for?
1995 Honda Civic Logo

1,284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

66126 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...