Question about 2008 Dodge Ram 3500

1 Answer

Serpentine belt diagram for a 5.9 diesel with air and 9 pulleys

2004 dodge 3500 dual 5.9 diesel

Posted by on

  • Anonymous Feb 28, 2009

    the diagram for a dodge ram 3500 serpentine belt

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 133 Answers

5.9L DIESEL
serpentine belt diagram for a 5.9 diesel with air  - 196759.jpg The 5.9L diesel engine accessory drive system (with a/c) consists of :

  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
  8. A/C Compressor Pump Pulley (8)
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley. 2. Attach a 1/2 inch ratchet to tensioner.


196757.jpg The 5.9L diesel engine accessory drive system (without a/c) consists of :
  1. Generator Pulley (1)
  2. Water Pump Pulley (2)
  3. Idler Pulley (3)
  4. Power Steering Pump Pulley (4)
  5. Radiator Fan Pulley (5)
  6. Crankshaft Pulley (6)
  7. Automatic Tensioner (7)
3. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Changing serpentine belt on 2004 dodge ram 1500


What are you asking for ? Attached find a link with serpentine installation for your motor vehicle

5.7L ENGINE


8199c656.gif
1 - A/C COMPRESSOR OR IDLER PULLEY 2 - FAN DRIVE PULLEY 3 - POWER STEERING PUMP 4 - CRANKSHAFT PULLEY 5 - IDLER ASSEMBLY 6 - TENSIONER ASSEMBLY 7 - ACCESSORY DRIVE BELT 8 - GENERATOR 9 - IDLER PULLEY
  1. Remove the air intake tube between intake manifold and air filter assembly.
  2. Insert a suitable square drive ratchet into the square hole on belt tensioner arm.
  3. Release the belt tension by rotating the tensioner clockwise. Rotate belt tensioner until belt can be removed from pulleys.
  4. Remove belt.
  5. Gently release tensioner.

May 30, 2014 | Cars & Trucks

1 Answer

Routing serpentine belt 2006 dodge diesel 4x4


going clockwise starting on the passenger side of truck
1 over the alternator pulley
2 under the water pump pulley
3 over the idler pulley
4 over the power steering pulley
5 over radiator fan pulley
6 over crankshaft pulley
7 automatic tensioner
8 over a/c if equiped

Jan 24, 2011 | 2005 Dodge Ram 3500

1 Answer

2004 dodge ram 3500 turbo diesel/ 6 pulleys/serpentine belt diagram


sorry nothing listed under either chrysler or dodge in my europeon alldata books

Oct 24, 2010 | 2001 Dodge Stratus

1 Answer

I need the belt diagram for a 2004 3500 dodge cummins diesel


If no belt routing diagram on the hood or the radiator core support bracket, it's grooved part of the belt on grooved pulleys, slick pulleys on the slick side of the belt and 3/4 around the crankshaft pulley. Sounds strange but if you follow this rule of thumb, you can install any belt, Good luck, Gary

Jul 27, 2010 | 2004 Dodge Ram 3500 Truck

1 Answer

I need the belt diagram for a 2005 dodge 3500 diesel 4X4


Check this diagrams (click for zoom)...

c73c3a8.jpg

Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines with A/C



a8e8692.jpg

Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines without A/C

Hope helps (remember rated this).

Jul 08, 2010 | 2005 Dodge Ram 3500

1 Answer

Serpentine belt replacement for a 2004 Dodge 3500 Ram Turbo Diesel with Air Conditioning!


check the hood or the frame rail around the engine bay. there should be a diagram.

Feb 21, 2010 | 2004 Dodge Ram 3500 Truck

3 Answers

Can i get apicture diagraghm for belt replacement for a 2004 dodge ram 3500 diesel 5.9


f6a4b25.gif
the one above is for :
Accessory serpentine belt routing—2004–05 5.9L Diesel engines without A/C


The one below is for:
Accessory serpentine belt routing—2004–05 5.9L Diesel engines with A/C


f945bbe.gif

Please do not hesitate to ask any further questions about your vehicle. Also please do not forget to rate and comment about your experience with fixya today.

Dec 27, 2009 | 2004 Dodge Ram 2500

2 Answers

Need a diagram for fan belt or serpentine belt


Here is a diagram for a 5.7L Hemi, and 1 for a 5.9L diesel. Hope this helps!

9d0184e.jpg 5,7L HEMI
2fbd5d2.jpg
5.9L Diesel

Jun 06, 2009 | 2006 Dodge Ram 3500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

5,647 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...