Question about 1994 Nissan Maxima
I try to start the car but the alarm keeps going off and I cant shut it off.
You need the remote control of the alarm to turn the alarm off.
you may need to change the battery of the remote in case it would no longer control the alarm or if you have a valet switch to turn off the alarm, then use it.
the immobilizer is working that is why you can not start the car.
tnx 4 using fixya,
Posted on Sep 13, 2008
USE YOUR KEY ON THE PASSENGER SIDE LOCK> UNLOCK AND LOCK AND UNLOCK YOUR ALARM WILL SHUT OFF>
Posted on Oct 28, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
was it a professional or shade tree install? the following is off vipers website:
disarming without a remote control
This feature allows you to disarm the security system without the
Remote Control should it be lost, damaged, or disabled. In order to
disarm the system without a remote remote control, you must have
the vehicle’s ignition key and know where the Valet button is
located. Be sure to check with the installer for the location and the
number of presses of the Valet button required to disarm the system.
To disarm the security system,
turn the ignition to the ON position.
Press the Valet button the
preset number of times (one to
five times) within 15 seconds. After five seconds the system will
disarm. If the system does not disarm, you may have waited too long;
turn the ignition off and on and try again.
if that doesn't work try this other
You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the Remote Control, but
all convenience functions (door locks, trunk release, etc.) will
continue to work normally.
To enter or exit Valet Mode:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
button within 10 seconds.
The status LED will light solidly if you are entering Valet Mode,
and it will go out if you are exiting Valet Mode.
Posted on May 08, 2010
Next time just disconnect the battery until you get it towed as this is a warranty item. I'll bet some wondered if this was a prank question like I did, right?
Posted on Nov 22, 2008
Try "cycling the key in the passenger door lock. Turn it all the way to the right and all the way to the left.
Posted on Jul 16, 2010
Tips for a great answer:
Mar 29, 2015 | 2002 Dodge Grand Caravan
May 25, 2014 | Ford Five Hundred Cars & Trucks
Jan 09, 2014 | 1999 Volkswagen Beetle
Jan 07, 2013 | Cars & Trucks
Nov 12, 2011 | 1995 Acura Integra Coupe
Mar 26, 2011 | 1997 Acura CL
Jan 28, 2011 | 1999 Chevrolet Silverado 1500
Jul 16, 2010 | 1999 Dodge Intrepid
Nov 17, 2008 | 2006 Hyundai Sonata
1,383 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: