2007 Toyota Camry Logo
Anonymous Posted on Sep 08, 2011

I have a Kenmore Dryer it works but will not tumble i'ts a heavy dudy super capacity 70 series modle 110-64742400 you may need this to dwjr-ele-2406028-fm54

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 1,959 Answers
  • Posted on Sep 08, 2011
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Apr 11, 2009
Answers
1959
Questions
1
Helped
1215269
Points
7500

When the drum won't turn and the dryer is otherwise working it's usually due to a broken belt. Open the front of the machine to inspect the belt.

  1. Under the lint door remove 2 screws
  2. Use flathead screwdriver to pry up the top lid
  3. In the middle of the drum should appear a belt, if you see it, pull on it. If it is loose it's fallen off the belt tensioner. If there's no belt of if the belt breaks in your hands, you need a new belt.
A sample of the typical belt routing for your machine is available at the link below:

Kenmore Dryer Belt routing

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 580 Super-L Series 2. It lost all forward motion works fine in all 4 gears in reverse I switched all relays no good what is my next step?

Question edited a bit, but questions like this need FULL 'make model (what it is)'. It appears that it might be a Case Back Hoe, but it is a complete guess. If it is, it appears to be a known issue. You would be better posting to one of the heavy machine forums. This site is more for domestic home stuff like the Cars and Turks category you posted to.

https://www.google.com/search?q=580+Super-L+Series+2%2C+no+forward+gears

..
0helpful
1answer

What is the capacity of my Kenmore series 80, model # 20852

the Heavy Duty 80 Series Extra Capacity Plus is 3.5 cu ft.
0helpful
1answer

Capacity fluid Engine

what series, what engine.
what engine option, before working on any car engine, know what you have first.
oil , or coolant?

remove operators guide from glove box, it is there.
here they all are, pick one, and post what you got, series 70?
http://en.wikipedia.org/wiki/Toyota_Land_Cruiser

get the operators guide
or FSM
or ID the engine,
3 ways.
0helpful
1answer

The blinkers in my 2003 f250 super duty wont work until an hour after it has ran and they will only flash once unless i put on the breaks. After they have been working something inside will make a constant...

It sounds like you need a new flasher relay. You can get it at your local automotive store. Make sure you get one that is heavy duty enough. If you often tow a trailer with lights, you will want the heavy duty one.
0helpful
1answer

Fuel capacity. for 2002 ford f250 super duty crew cab diesel

Fuel capacity is 38 galons.
Found it on:
http://consumerguideauto.howstuffworks.com/2002-ford-f-250-f-350-super-duty-13.htm
2helpful
1answer

I have a kenmore 80 series electric dryer. It gets

If your dryer doesn't tumble, check these: Belt Motor Door switch Belt Dryers have a drive belt that turns the clothes drum. If the belt breaks, the drum stops rotating. Then you need to replace the belt, and often the idler pulley, because the pulley tends to wear out at the same time. Click here for a belt installation diagram Motor If the dryer motor only hums when you press the Start button, the motor may be burned out. Here's how to test the dryer motor: Remove the belt. Check for obstructions in the blower fan housing. Manually rotate the shaft of the motor. If the motor is very stiff, or impossible to rotate manually, and the blower fan housing is clear, you need to replace the motor. If the motor rotates freely, run the motor momentarily with the belt removed and the blower in place. If the motor runs fine with the belt removed, there may be a problem with the idler pulley or the clothes drum. Try to rotate the drum by hand. If it is very difficult to move, correct any problem with the rollers or pulley, and then reassemble the dryer and try it again. If the motor hums but doesn't rotate on its own even with the belt removed--yet you can turn it freely by hand--you usually need to replace the motor or the motor start capacitor. Door switch Your dryer can't operate at all if the door switch is defective. It's inside the dryer main housing near the door frame. Sometimes you need to raise or open the top or front of the dryer to reach the switch. If it's defective, you need to replace it.
Thanks for choosing fixya...Regards, Joe
0helpful
1answer

I started my dryer one night i figured it would shut off but when i woke up the next morning it was still running and appeared to still be warm. The timer apparently was stuck on 70 minutes. the following...

Kenmore is a Sears brand and there isnt too much info on the net as for tech support. Youre best option is to call sears and see if they can give you any over the phone advice, but if the timer switch is getting stuck, it sounds like it may need replacing.
0helpful
1answer

I am going to replace the rotors on my wifes E350 dog grooming van, are they pressed on?

I have done rotors on Heavy Duty F series (same frame etc) and the rotors were not pressed on. Should be the same. Good Luck
Not finding what you are looking for?

167 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...