Question about 2000 Chevrolet Silverado

2 Answers

2000 Silverado L/T Z71 4X4 Lubrication Diagram

I need a diagram showing where all the lubrication points are located

Posted by on

  • Donnie Sep 12, 2011

    to service the trans is there a way to drain torque converter

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

Lube points should be: All moving joints in suspension. Ball joints, idler arm, tie rod ends etc. On 4X4's, all universal joints on drive axles (excluding C/V joints... just inspect boots) All slip-joints and "u" joints on driveshafts. Many of these items may not have zirk fittings on them from the factory. If the component has a plug installed, it should be removed & replaced with a fitting. If there is no place for a fitting, when the item wears out, the replacement will have a fitting.

Posted on Dec 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need to lube my 1999 Z71. How to?

Posted on Aug 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need lubrication flow diagram for 2005 Pontiac G6 3.5L V6.


Why do you need this?
In any event I don't have the exact diagram, but all engines use the same flow, from the pump it goes to the Camshaft bearing and then out to the top end and lower end bearings. See typical diagram. The yellow lines are oil flow.


26214564-hoedyifrnzupfxfowgwvgd2b-5-0.jpg

Jun 08, 2016 | 2005 Pontiac G6

1 Answer

Does my Buick LeSabre 1992 have chassis lubrication points?


lubrication points will be ball joints and "U" joints
I suggest that to enable you to successfully find all the points, that you have the local mechanic do the job and while he is at it to point out the locations to you so that next time you can do it your self

Aug 08, 2015 | 1992 Buick LeSabre

1 Answer

Need location of lubrication points for a 2002 silverado 1500


There should be two in the front and two just a little ways back from there.

Dec 14, 2013 | 2002 Chevrolet Silverado 2500HD

1 Answer

E46 oil sensor location


Looking at the oil filter housing unit from the driver's side, the oil pressure switch is nearest the round portion of the housing and the water/oil temperature sensor is to its immediate right.
See REALOEM.com. Enter last 7 digits of the VIN, select Main group 11, Engine, select Subgroup 11 30, lubrication system, then select diagram for lubrication system-oil filter.

Jan 09, 2013 | BMW 3 Series Cars & Trucks

1 Answer

I would like to have a Lubrication Diagrams & Locations for my 1997 Dodge 1500 4 X 4 Extended Cab Pickup


I have been unable to find that diagram for mine but when I did it there was atleast 6 in the front if it helps

Apr 12, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

Belt diagram for 2000 silverado 1500 5.3 liter,


under the hood is a sticker - or better yet - take the vin to the dealer - they will give you a free print out or even email or fax it to you.
Best of it.

722dc89.jpg

Apr 03, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

Need diagram to replace a/c belt


THE A/C BELT GOES ON AROUND THE COMPRESSOR AND THE CRANKSHAFT AND OVER THE TOP OF THE TENSIONER.

May 31, 2009 | 2000 Chevrolet Silverado 1500

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

1,547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...