Question about 1995 Chevrolet Silverado 2500

1 Answer

How to replace a heater core in a 1988 silverado

Posted by on

  • 89chev Sep 25, 2008

    need heat...how do i replace heater core ?





×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Its behind your glove box i think cut a hole in your fire wall its easer weld it back later

Posted on Nov 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1988 chevy silverado 1500 heat does not work replaced waterpump, thermostat,heater core,inlet pipe goes into the intake,and a radiator


The only thing left is the heater control valve. if you replace it,that should fix your problem.

Jan 13, 2012 | Cars & Trucks

1 Answer

How to get to the heater core in my 1988 chevy s10


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Jan 08, 2011 | 1988 Chevrolet S-10

1 Answer

What is the process to putting in heater core in 1983 chevy silverado?


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Jan 06, 2011 | 1983 Chevrolet Silverado

1 Answer

Where do the heater core hoses attach to engine on an 1988 f-250 with air


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 23, 2010 | 1988 Ford F 250

1 Answer

How do i change the heater core on my 1999 chevy silverado 1500?


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 11, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

How to replace heate core 1988 buick reagal


REMOVE OR DISCONNECT
  1. Negative battery cable.
  2. Drain cooling system.
  3. Upper firewall weatherstrip.
  4. Upper secondary cowl.
  5. Heater hoses from core.
NOTE Blowing out residual coolant from inside the heater core will prevent coolant leakage into the passenger compartment when the heater core is removed.


  1. Sound insulator.
  2. Rear seat duct adapter.
  3. Heater duct.
  4. Heater core cover.
  5. Heater core.
INSTALL OR CONNECT

  1. Heater core.
  2. Heater core cover.
  3. Heater duct.
  4. Rear seat duct adapter.
  5. Sound Insulator.
  6. Heater hoses to core.
  7. Upper secondary cowl.
  8. Upper firewall weatherstrip.
  9. Fill cooling system and check for leaks.
  10. Negative battery cable.

ba5091b.gif

f8f6a8e.gif

Oct 21, 2010 | 1988 Buick Regal

1 Answer

Replace heater core in 1988 Ford Ranger


allow the system to cool down

take radiator cap loose to release pressure

once pressure is released tighten cap

loosen clamps on the heater hoses in the engine compartment on the pass. side of firewall.

plug or cap off the heater core tubes to prevent spillage when you pull it into the truck

place a trash bag on floorboard in case spillage occurs

remove the five screws holding the heatre core access cover, three on top and two on bottom

carefully pull heater core back and down and remove it from the dash

install is reverse

Hope this helps

Jan 16, 2009 | 1988 Ford Ranger

1 Answer

1988 camero heater core replacement


Bossman there is no fast or simply way of fixin this problem!! However for a temperaury solution. You can take one heater hose off under the hood at the heater coreand undo the other one at the intake then connect the hoses coming out of the heater core to itself so nothing gets inside the heater core and do the same with the intake so that you dont have a mess!! To fix your problem you are going to have to remove your dash back and undo the heater box to get to the heater core!!

Oct 25, 2008 | 1988 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...