Question about 2000 Ford F150 Flareside SuperCab

1 Answer

SIGNAL & STOP LIGHT PROBLEM

I need help fixing the signal and stop light in my truck. Its a Ford 2000 F-150. I would appreciate your help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Try multi-function switch

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4 wire to 3 wire


4 way flat molded connectors allow basic hookup for three lighting functions; right turn signal / stop light (green), left turn signal / stop light (yellow), taillight / license / side marker (brown) and a ground (white). so if you go down to 3 you will loose a function

Aug 24, 2012 | Ford Cars & Trucks

2 Answers

Tail light doesnt turn on with headlights but works fine as a break light and turn signal, why?


in the rear lights you may have two bulbs one is the turn signal the other one is stop light / tail light the stop light / tail light has two filaments, one for the stop light (21 watt) & one for the tail light (5 watt) it is possible that the tail light filament is blown, try replacing the bulb to see if that fixes the problem,also check all the fuses as well.......hope this helps......cheers.

Aug 15, 2011 | 1994 Cadillac DeVille

1 Answer

I have a 1994 cutlass supreme and both the turn signals are flashing when they are engaged. We replaced the turn signal flasher underneath the dash, thinking that it might help and it did not. We also had...


Stop replacing things and turn off your hazard lights. If this doesn't fix you may have to replace your steering column turn signal switch. Youer hazard lights aren't working likely to a blown fuse.

Jun 16, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

Brake lights and turn signal stop working at the same time


If brake lights not working then its quite possible that the problem is .either the brake light fuse or the brake light switch.The brake light switch is causing the turn signal light to stop functioning.Check out both the brake light fuse and the brake light switch. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Aug 17, 2010 | 1998 Ford Expedition

1 Answer

I installed a 1987 monte carlo steering column in my 30 ford hot rod i need the color code of the wires so i can conect the directional signails up


H).l-blu wire connect to left front turn signal J).dk-blu wire connect to right front turn signals K).brown wire connect to hazard/flasher relay output L).purple wire conect to turn/flasher signal M). yellow wire connect to left rear stop hazard light N). dk-green wire connect to right rear stop/hazard light P) white wire connect to stop light swirch output

Jun 25, 2010 | Cars & Trucks

2 Answers

What lamps takes ford focus 2001


This may help
Low Beam Headlight Bulb Size: 9003/HB2
High Beam Headlamp Light Bulb Size: 9003/HB2
Parking Light Bulb Size: 3157LL
Front Turn Signal Light Bulb Size: 3157LL
Rear Turn Signal Light Bulb Size: 3157LL
Tail Light Bulb Size: 3157LL
Stop Light Bulb Size: 3157LL
High Mount Stop Light Bulb Size: 2825
Fog/Driving Light Bulb Size: 899
License Plate Light Bulb Size: 6418
Back Up Light Bulb Size: 3156LL
Front Sidemarker Light Bulb Size: 194
Map Light Bulb Size: 3886X
Dome Light Bulb Size: 6411
google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);

Apr 07, 2010 | 2001 Ford Focus

1 Answer

Looking for a wiring diagram for a 2006 Ford Expedition


7way- black is 12volt (power), brown, running lights, yellow is left turn signal and stop light, green is right turn signal and stop light, white is ground, blue is brakes, and orange is aux power (can be back up lights, if trailer equipped w/ them). 6way is the same, minus orange wire. I have run into some variations to the above color codes (brown, yellow and green only-sometimes these 3 are different than stated, but only mixed as that group, as to what they control- example would be green is running lights, brown and yellow are turn signal and stop lights, the others should be as stated), if you have any trouble with things not working properly, it may be due to these variations, although the above are pretty standard. If you have an ohm meter you can check as you go (check for power at black wire- should be constant 12v, turn on turn signal and check for power-it will fluctuate from approx. 12 volts to 0 volts as the signal power pulses in the wire) hit the brakes, blue wire should show power, etc. Let me know if you need more help as you go.

Apr 11, 2009 | 2006 Ford Expedition

1 Answer

Turn signals 2003 Ford F-150


Sounds like the turn blinker is shorted internally. Suggest you change it out, to test this.

My next check is that no wiring is melted and burned, such as can happen with any connection to tow a trailer. U-Haul has fine print that indemnify them of any problems they cause! have you towed anything recently?


Dec 25, 2008 | 2005 Ford F-150

2 Answers

1969 ford mustang mach 1 brake / stop light switch challenge


Most tail light problems are a result of a bad ground......somewhere.

Sep 16, 2008 | 1966 Ford Mustang

1 Answer

Ford Taurus Signal light failure


i can tell u this the multifuncion switch is in the steering colum signals,highbeam flash to pass and wipers chuck

Jul 09, 2008 | 1998 Ford Taurus

Not finding what you are looking for?
2000 Ford F150 Flareside SuperCab Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...