Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop manuals, service bulletins, campaigns, illustrations and procedures, etc.
SOURCE: i am doing a head gasket setting alignment
you will find two bright links on the chain that correspond to the dots on the cam shaft and the key ways on both cams should line up with the top of the head facing back towards the firewall IE parallel with the top surface of the head ( where the tappet cover bolts on), with the crank on TDC (top dead center)
SOURCE: how hard is it to replace a head gasket on a hyundai lantra
Most head gaskets are straight forward. If you can replace one on a front wheel drive Ford you can replace about any front wheel drive head gasket. The only difference would be where the bolts are to remove the intake and exhaust. After that everything else is about the same. The best advice i can give is take time to read a manual like Haynes. They have manuals for just about every vehicle on the market.
260 views
Usually answered in minutes!
×