Question about 2000 Volkswagen Beetle

1 Answer

Assorted dash board lights

1. radio and cd player stopped working
2. kept draining battery
3. abs and brake light came on
4. radio fixed and battery draining problem fixed
5. nothing can be found wrong with abs and brake lights

The dashboard always looks like a Christmas display.

Posted by on

  • Anonymous Mar 27, 2014

    Radio and cd stopped working no power or lights

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

If you smoke or eat in your vehical your smoke proble got in to it and messed up your hloe system. I suggest you getting a cd/dvd cleaner and try that. If it worked for me it should work for you to! Good Luck!

Posted on Sep 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abslight stays on. How to fix? This is a2007trailblazer?


First you need to have EBCM - electronic brake control module check for DTC'S - diagnostic trouble code's . If the light is on there is a code stored . I think most part stores can do this and for free . After you find out what code is stored , looking up that code in service repair information for diagnostic trouble shooting chart would be next step . There are a few codes too.
DTC C0035 or C0040
DTC C0045 or C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0186
DTC C0196
DTC C0201
DTC C0240
DTC C0241 or P0856
DTC C0244 or P1689
DTC C0245
DTC C0283
DTC C0287
DTC C0290 or C0292
DTC C0455
DTC C0550
DTC C0558

Find the code do the diagnostic's , fix the problem , wiring issue's , a sensor , bad module ,what ever it is . The light will go out then . Here is a sample of code discription .
• DTC C0035 Left Front Wheel Speed Sensor Circuit
• DTC C0040 Right Front Wheel Speed Sensor Circuit

Dec 30, 2016 | 2007 Chevrolet Trailblazer

2 Answers

Brakes are hitting the floor, what to do?


Did you check for the presence of brake fluid? Is your master cylinder any good?

How about the tubing? - if you have a hole in the brake fluid tubing or a leaking fitting you will lose your fluid and ......................

Aug 24, 2015 | Cars & Trucks

1 Answer

Why is 97 rodeo battery and brake light turned on and a/c blower want turn on


is engine running?
if yes>?
got ABS?
1: charge system failure.
2: brake failed or fluid low, or other brake failure. (up to 4 on light)
3: the blower in the dash is dead? in all modes, heat and A/C?
do tell.?
does the blower work in High.
did all this happen in 1 day, or a year, or just bought this sick car/?

check fuses yet?
blower fuse.

Jul 01, 2014 | 1997 Isuzu Rodeo

1 Answer

Alt. and brake liht on dash


the alt glows, when the charge system fails.
belt feel off? or engine RPM way below 800rpm hot?
or bad, battery, wiring or alt.,

the brake lamp comes on for every key on, for self test.
and at each engine stall. this is NORMAL.
the brake lamp warning glows usually for 4 reaons.
1: hand brake stuck on, or its switch.
2: low brake fuild.
3: front or rear brakes have failed (the balance switch)
4: ABS if fitted, is having , well Fits.

May 05, 2014 | Geo Prizm Cars & Trucks

2 Answers

My brake light on my dash is constantly on


Look beneath the dash panel at brake pedal assembly. You should see the brake light switch, which completes a circuit to brake lights when you step on the brake pedal. Its likely this switch is malfunctioning. The circuit is closed (power to brake lights) when the brake pedal is not depressed. The circuit is suppose to be open (no power to brake lights) when your foot is off the brake pedal. Unplug the wire connector and unscrew to replace this brake light switch.

As for the knocking sound, is it when the vehicle is in motion? Or even when the vehicle is stopped and idling in park?07060338-db0d-4c14-8a08-ace846c99fb4.jpg

Nov 29, 2013 | 1995 Mazda 626

1 Answer

Battery light on while driving, radio stopped& now other dash lights coming on


low voltage will cause these symptoms. get alternator checked and battery checked

Jun 13, 2013 | 1995 Lincoln Continental

2 Answers

92 dodge dakota brake light abs light stuck on


ABOVE "Answers??" are only 1/2 correct ! Reason is:#1 doesn't help if you have 89-93 Dakota with ABS on REAR 2 wheels only. #2 is wrong BECAUSE ANY loss of brake fluid to rear leveling block sensor(located within frame above rear axle) will trigger cpu to keep abs light on=NOT electrical.#3 is worthless because it does not address brake fluid problem/air in system only(probably how to clear/read code by turning ignition switch). Answer=:Turn ignition key to just before start 3 times and wait a couple of sec for abs light to blink. Count # of blinks between pause and write down CODE ie 4 blinks=#4 pause 7 blinks=#7 the example code= 47. Look up code and read problem;CLEAR code by disconnect battery for 5 min to let cpu erase code. If spongy pedal or need fluid; bleed at all wheels PLUS at rear leveling block contained in frame(it has a small bleeder valve too and hard to get to!). If you have later models from 1995? with new system III you will need code reader/tester. P.S. If you have a parasitic electrical leak(battery goes down over 1-3 days) check fillament(sic) on rear bulbs. One could be broken and lay against other. Bulb will work most of time BUT WILL BE PARTIAL SHORT-therefore draining battery! Good luck-Rick

Jul 14, 2012 | 1992 Dodge Dakota

1 Answer

Abs fuse


Fuses are listed here

* = maxi fuse

1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay

6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay

mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump2.gif relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator


Interior fuse panel (mini fuses)

1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**

15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

Oct 29, 2009 | 2003 Ford Explorer

1 Answer

95 Trooper: dash backlight, RrABS/Brake Light


You can remove the dash urself.Its quite simple.4 screws.Then you can check the wire plugs at the back.And you can change the bulbs by twisting the plasic ends,
for your brakes change the pads..

Jul 19, 2009 | 1995 Isuzu Trooper

2 Answers

Washer fluid inop. CD plyr inop. 3 error messages. More


which wipers the headlight ones or the main ones?disconnect the motor and using a 12 volt fused power,see if the motor works,it sounds shorted.the cd sounds like the laser is burnt out and getting a changer and modulator for 200 is a cheap fix,or an i pod.they have a modulator that broadcasts on fm and they sound really good. the traction control can be triggered by a bad abs sensor as well.eemove the wheels and clean the sensors with brake clean.the tail light may look like it works,but the voltage could be low from a poor ground or a bad socket.since the differential voltage from the battery to the light is what triggers it,check the socket and grounds.i had exactly the same on a 325 bmw and it was a 2volt drop.the battery should not drain in 15 minutes.it may raed 12 volts but have reduced current from a bad cell.have the battery AVR tested

Jun 13, 2009 | 2004 Saab 9-3

Not finding what you are looking for?
2000 Volkswagen Beetle Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

yadayada
yadayada

Level 3 Expert

69102 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...