Question about 2001 Chevrolet Suburban

1 Answer

2001 chevrolet suburban knock sensor

Hey im having trouble locating the knock sensor on my 2001 chevrolet suburban, can you help?

Posted by on

  • 2 more comments 
  • roy3mom
    roy3mom May 01, 2012

    The sensors are under the intake like the other post stated. Be sure to use OEM GM knock sensors because I just had both of mine replaced and the service engine light came back on. Called dealership and they said to use GM sensors and I did. Light went off an has not come back on. I have a 2001 Suburban 2500 with the 6.0 engine.

  • Anonymous Mar 12, 2014

    where is the knock sensor on a 4wd 5.7l chevy suburban

  • Anonymous Mar 16, 2014

    brake sensors 2001 chevy suburban 4x4

  • Anonymous Mar 19, 2014

    loud knocking from rear axle location usually when riding over uneven surfaces

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

You have 2 of them on that vehicle and both of them are located under the intake manifold.

Posted on Sep 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 suburban 5.3 engine where are knock sensors located and how do you replace them


two knock sensors.under phlemm assy. replace cover gasket, two sensors and wire harness.

Jan 27, 2013 | 2005 Chevrolet Suburban

1 Answer

I cant locate the knock sensor where do i find it?


There are 2 knock sensors located below the upper intake manifold. With the intake removed follow wires to the middle of engine near the front and back. The sensors are recessed in the lower valley pan and covered by some type of insulating material. The rear sensor usually fails due to water working past the insulating material and filling the hole with water and covering the sensor, causing it to rust. Remember to replace the upper intake gaskets and injector o-rings. You dont want any other driveabiliy issues after this repair.

Mar 25, 2012 | 2001 Chevrolet Suburban

2 Answers

Where is the knock sensor located at on my 2001 chevrolet suburban 2wd, 5.3L v8?


It is located on the side of the block. It is round with a 1 wire connector. you can get a replacement at the parts store and see what it looks like.

Aug 18, 2010 | 2001 Chevrolet Suburban

1 Answer

Help to find knock sensor 1993 chev suburban


The knock sensor is on the passengers side just in front of the starter.It has a 1 wire connector going to it.You might have to drain the cooling system to replace it.Hope this helps.Good luck.

Mar 16, 2010 | 2001 Chevrolet Suburban

1 Answer

Where is the knock sensor for 2001 chevy suburban located


this is located on the bottom of the block just above the oil kind of mid center of the block most of the time of pass side

Sep 26, 2009 | 2001 Chevrolet Suburban

1 Answer

Knock sensor


check out you tube, replacing knock sensor

Sep 05, 2009 | 2001 Chevrolet Silverado

1 Answer

Knock sensor location


HI, click the link below to be directed to a full diagram that will show you the actual location of the sensor. 718 will be the actual sensor to extract and 739 is the mounting screw for the KS.

KNOCK SENSOR DIAGRAM

Jul 22, 2009 | 2001 Chevrolet Silverado

1 Answer

Need how to and location to replace knock sensor


Im looking for the same part location on a 2002 chevy blazer. It might be under the distributer cap.

May 30, 2009 | 2001 Chevrolet Blazer

1 Answer

Location for knock sensor


All current V8s (4.8L, 5.3L, etc.) have two knock sensors located beneath the intake manifold.

Feb 13, 2009 | 2002 Chevrolet Suburban

Not finding what you are looking for?
2001 Chevrolet Suburban Logo

Related Topics:

776 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...