Question about 1994 Eagle Talon

1 Answer

Brake lights do not work.Running lights work,turn signal works,bulbs are good and fuses are good under dash. thank u jim

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

There should be a switch on upper portion of your brake pedal that connects the brake light circut when you apply the brakes. inspect it and try shorting the two wires together when you do you should have lights. if that works replace the switch

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why no right side turn signal or brake light?


Check the bulbs, and turn signal relay under dash. And just to be sure about the fuse replace it with new 1 to if it start.

Oct 02, 2015 | 2000 Ford Mustang

2 Answers

!997 Ford Thuderbird brake lights and hazards do not work


Lets start at the beginning.
The turn signals and brake lights use different fuses but both go thru the turn signal switch and use the same bulbs.
Have you checked the fuses for each circuit and does each switch have power in and out ?

Feb 03, 2013 | 1997 Ford Thunderbird LX

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Hell i just bought a chevy cavlier and my back break light is out...the light its self is on...its just the break light when pressed...


you don`t say if its both or just one brake light out.you say the light itself is on but not if you mean tail light or what.the tail lights use a different filament in the bulb than the signal light which is the same filament that the brake light uses.if the signal light work on the rear then the bulbs are good,if just one side works then the bulb is no good on the side that doesn`t work.if the signal lights work but neither brake light works then you need to check the fuses in the fuse panel under the dash on the drivers side.if the fuses are good then it will be either a bad wire at the brake switch or a bad brake light switch,this is located on the brake pedal lever under the dash.

Mar 18, 2011 | 1999 Chevrolet Cavalier

2 Answers

No brake lights, turn signals, or 4-ways.


Did you actually check the bulbs? I believe your brake lights, signal lights, hazards all use the same bulb for each side.

Your brake lights may be your brake switch just above your brake pedal.
The signals could be your electronic flasher module (EFM) located under the dash near the steering column.
Your hazards may be affected by the EFM, but not likely and the switch for your hazards may be faulty

Sep 10, 2009 | 1998 Chevrolet Blazer

1 Answer

1998 Lincoln Town Car: No turn signals, 4 way flash, brake lights


If only your brake light in middle of rear window works then your other bulbs are bad. If brake lights all work in the back than bulbs are good. If you put turn signal on right or left and the bulbs light in front and back then you need to change multifunction light control box under dash. My understanding is it cost $600 new. So I would try used.

Jun 06, 2009 | 1995 Lincoln Town Car

Not finding what you are looking for?
1994 Eagle Talon Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...