Question about 2003 Chrysler Town & Country

1 Answer

Washer spray on back windshield

When you hit the button to spray washer fluid on the back winshield, the washer fluid sprays out and not on the windshield

Posted by on

  • Anonymous Mar 23, 2014

    Not spraying on drivers side

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

I've actually had this issue with one of my cars. there are tiny spray nossles, that can pivot, from which the water shoots out of to hit the windshield. you need to find something slim and sharp like a bobby pin and place the tip into the exit hole where the water shoots out. gently pivot the nossle towards the area where you want the water to hit the wind shield. be careful not to push the pin too much into the nossle. you may warp the nossle tip and the water my spray out in an undesireable fashion.

Posted on Sep 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2007 Saturn Vue there is what I think is an air pump which is cracked that one port is not connected to anything.


There is a electric motor that pumps washer fluid . Located in the bottom of the washer fluid tank .
Wash Operation (Front and Rear Wipers)
The front and rear washer systems use the same windshield washer fluid pump. When either the front or rear wiper is in the washer position voltage will be supplied to one side of the windshield washer fluid pump (depending on whether it is front or rear), while the other side of the pump is grounded.
At this point, the windshield washer fluid pump sprays solvent onto the windshield. When the front or rear washer is activated, the BCM receives an input from the switch that is activated. The BCM will control the wipers while in the WASH mode. The BCM will control either the front wiper relay or the rear wiper relay to turn on the wipers. The windshield wipers operate at low speed for 3 swipes and returns to the park position.

When turning on the washers do you hear the motor run ? Have some one try it while you listen at the washer fluid tank ! These pump motors do go bad .
turn OFF the ignition.
Disconnect the harness electrical connector of the windshield washer fluid pump.
Connect a test lamp from the windshield washer pump control circuit to a good ground .
Turn ON the ignition, with the engine OFF.
Press the front washer switch.
Does the test lamp illuminate?
YES or NO !

Nov 18, 2016 | Saturn Cars & Trucks

1 Answer

How to fix a misdirected windshield washer


You can use a small sharp pick and insert it into the sprayer nozzle and gently move the nozzle in the direction needed. It may take a couple of tries to get it where you want it

Apr 06, 2015 | 2002 Ford F-150

1 Answer

Frozen winshield washer lines


Find a heated garage, you need to thaw out he lines, or use a hair dryer if you can follow the line path. When working, drain all the fluid by holding down the spray button on the car. Go and buy he heavy duty washer fluid with the lowest freezing point you can buy and refill your washer reservoir with it. Don't add any water Most likely you had water in the reservoir and it froze.

Jan 20, 2013 | 1998 Ford Taurus

3 Answers

Windshield washer fluid does not spray on my. Windshield


Sounds like the spray nozzle is bent or partially plugged up.

Jan 05, 2013 | 2001 Mazda Protege

1 Answer

My 2007 impala will not spray out winshield washer fluid


check tubing is not blocked if not blocked and resiviour is full check wiper moter fuse if wipers work replace windshield squiter unit .

Nov 24, 2010 | 2006 Chevrolet Impala

3 Answers

I think my van has a clogged windshield nozzle. The wiper fluid comes out but doesn't even squirt high enough to hit the windshield.


First try to clean out the squirter nozzles.Take a very small wire, sometimes a staple works great, and stick it into the nozzle to clear any debris.Then try to spray it again.If this didn't solve the problem and the debris is cleared, then you either have a weak or blocked pump, which is located on the washer reservoir itself.Hope I could help!!! Rate me accordingly!! Thanks!

Oct 06, 2010 | 2002 Chrysler Town & Country

1 Answer

1996 Breeze: what is the windshield washer fluid spout called...


Windshield washer spray nozzles ( at least for the ones that are on the hood that spray the fluid onto the windshield ) hope this helps.

May 05, 2010 | 1996 Plymouth Breeze

1 Answer

My windshield washer fluid resevoir is full but I don't get any fluid when I try to clean my windows. I checked the spray ports and they are not clogged. I'm not sure what to check next. With the bad...


I expect that you have two different pumps. One for your headlights and one for the winshield. So making the following test, turn off your headlights and try to get washer in your windshield. If you hear the sound of a pump then the line is disconnected or clogged somewhere. If you don't hear anything then the pump is bad. Not hard to replace (should be attached to the reservoir), not very expensive I would say $60 in auto part store)
Hope it will help
Dan

Dec 23, 2009 | 2004 BMW 3 Series

1 Answer

Windshield washer fluid not spraying


Try standing outside of the vehicle and having someone press the "juice" button and listen to see if the motor is trying to spray. If it is....check to to see if you have contaminents in the windshield wiper fluid reservoir.

Mar 11, 2009 | 2002 Mercury Cougar

2 Answers

Windshield Water Spray


pull hose off sprayer and check for water pressure if pump is pumping water then jet is blocked use a small sowing needle in the jet to unblock jet dirty water blockes them get someone to hold the swich down while u do this wear saftey glasses when u do this u dont want dirt in your eyes

PLEASE RATE THIS HELP

Dec 16, 2008 | 2004 Acura MDX

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

68032 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...