Question about 1999 Ford Contour

1 Answer

1999 Ford Contour Vacuum Intake Manifold

There is a vacuum leak and it is making a hissin noise but we can not find the leak??????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Can you explain it little bit more i might be able to help you

Posted on Sep 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 ford taurus,lopes when first started,when cold.


intake manifoold leak check all vacuum lines replace all vacuum lines if look cracked ,spark plugs could be fouled out by leaking fuel injectors, clean fuel injectors,replace fuel filter,replace air filter,replace spark plugs and wires,do tune up see if it helps if not.could have leaking intake manifold gasket or leaking egr valve,use engine vacuum gauge check engine vacuum for intake manifold gasket leaks.

Sep 23, 2012 | Ford Cars & Trucks

1 Answer

What is a vaccum leak on a 1999 buick regal


All engines have vacuum created in the intake manifold, because the pistons are pulling in air into the cylinders from the intake manifold, resulting in a pressure drop in the intake. A leak is caused when the intake manifold gasket is bad, or when a vacuum hose off the intake becomes disconnected or breaks. The hose will then **** extra air into the intake, causing a higher than normal idle, maybe a rough running condition, and can be identified by a slight whistling noise at the break or at the disconnected end of the vacuum hose.

Feb 20, 2012 | 1999 Buick Century

2 Answers

The line that connect from the intake to the brake booster


This is a vacuum line. It produces vacuum to the brake booster which in turn makes it easier for you to press the brake pedal to stop.

Feb 09, 2011 | 1998 Ford Contour

1 Answer

Idling stall;but pressing gas pedal works


Most likely a vacuum leak, check all lines off throttle body and intake manifold.

Nov 26, 2010 | 1998 Ford Contour

1 Answer

What does the troubleshooting code p0171 mean?


This code indicates that a lean condition has been detected, this could be caused by a vacuum leak in the intake area. Check all vacuum lines for cracks.

Nov 08, 2010 | 1999 Ford Contour

2 Answers

2000 ford tarus wont idle v6


apply a light force to the gas pedal and start the car continuing to regulate the rpms with gas pedal if you can make the car idle with the gas pedal then you will probably need a new idle air control valve

Dec 10, 2009 | 2000 Ford Taurus

1 Answer

2002 Mitsubishi Galant gets poor acceleration.


LOOK AROUND THE AIR INTAKE HOSE.MAKE SURE IT IS INTACT NOT LOOSE.CHECK ALL VACUUM HOSES ON INTAKE.MAKE SURE THEY ARE IN PLACE.

Aug 17, 2009 | 2001 Chevrolet Impala

1 Answer

How to find a vacuum leak on a 1999 ford countour 2.0


Check the tube between the engine and the intake manifold. I had one that broke there and the car idled up and the check engine light came on.

Apr 26, 2009 | 1999 Ford Contour

Not finding what you are looking for?
1999 Ford Contour Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...