Question about 1989 Toyota Camry
What is the timing mark for a 1990 toyota camry le
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
Posted on Sep 12, 2008
Firstly the no.1 piston should be at TDC (compression).
The upper camshaft sprocket has a smaller hole in the web. This should be lined up exactly with the TDC timing mark behind it on the cam bearing cap. In this position it will be vertically upwards.
At the same time the notch in the crankshaft pulley timing flange should be opposite the 0 degrees mark on the timing marks on the front of the lower belt cover.
Posted on Nov 18, 2011
Tips for a great answer:
Nov 12, 2011 | 1994 Toyota Camry
Jun 09, 2011 | 1990 Toyota Camry
Apr 11, 2011 | 1989 Toyota Camry
Sep 20, 2009 | 1991 Toyota Camry
May 23, 2009 | 1990 Lexus ES 250
Apr 08, 2009 | 1990 Toyota Camry
1,142 people viewed this question
Usually answered in minutes!