- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
low brake fluid, what year/ lost the operators guide, ?
the light glows for 3 reasons, or 4. (depends on year)
hand brake, fluid, abs (rwal) , and brake failure front or rear
the check engine light coming on is (maybe) and engine fault
again no year, stated, but it means to scan the ECU to get the
errors. connect scan tool, press scan, bingo.,
on some years,1997 and above, it also reports, A/T errors.
It would help if I knew which year/model Hyundai you are referring to. However, you describe an issue which I've run into before. The 'tail lamp relay' contacts are shorted together. in most Hyundai vehicles, this relay is located in the passenger compartment junction block (Fuse/Relay panel). This relay is not serviceable in most Hyundai Vehicles (meaning it cannot be replaced because it's a permanent part of the panel). The only way to fix it is to replace the panel. However, there were a few year/models in which you could replace it.
This reset for key fob Hyundai coupe year 02 to 04
Turn ignition to position two
Press lock or unlock once
Ensure indicators flash once to confirm reset
This will enable fob providing you have no other faults
Good luck barry
HI. Two issues here. The first will be with your fuel pressure regulator. this device can fail, mechanically, thus, causing an inappropriate amount of fuel to be introduced into the system. this will cause flooding, due to a ruptured diaphragm. I recommend to have this device inspected for damage.
The second issue will deal with a failed injector(s). Injectors can fail In this way, as well. This device can become filled will debris, thus, causing the mechanism to not close completely. This will cause flooding, in this case. replace any injector that is damaged in this way(stuck open).
Adjusting the handbrake is easy.Between the two front seats where the cup holders are behind there is a cubby hole.This has a bottom which can be easily prised out.You will see the handbrake adjusters which you just need to tighten.