Question about Chevrolet Cavalier

2 Answers

My signal wont work hazard lights are okay and fuse is fine

Posted by on

  • Anonymous Mar 20, 2014

    My hazard lights do not work, they do not light up. My other lights, turn signals and headlights work fine. Is there a fuse for hazard lights or do I need to replace a switch?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 178 Answers

First things first make sure your blinker bulbs are not blown if okay change your flasher relay up under the dash this usually is round and you will here it tick to the blinker flash on dash some vehicles have one flasher unit some have two a seperate for the hazard

Posted on Sep 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

Try a new flasher unit . you will see 2 one is for turn and other is for flashers so just switch them and try it again. good luck

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Chrysler Vision hazard light


on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Nov 10, 2013 | 1997 Chrysler LHS

1 Answer

Turn signals and hazards stopped working on 2000 hyundai elantra


If the hazard switch had been removed and replaced for any reason, it may not have been connected properly.ie: a loose connector, If you say that bulbs (and fuse?) are okay, this could be checked.
Lou Arnone (Lucky Elantranian)
P.S.: I love my Elantra. When I bought it more than eleven years ago, it was love at first drive. It's been that way ever since.

Mar 28, 2013 | 2000 Hyundai Elantra

1 Answer

The hazard lights buzz and don't work.


if fuse okay,could have faulty multifunction switch.

Nov 20, 2012 | 1997 Chevrolet Malibu

1 Answer

I have a 2006 GMC Envoy and the problem that i have is that all the signal lights stopped working including the hazard lights i checked all the fuses and all are find. What could it be? If somebody can...


{: ) If the IGN E fuse and the HAZARD fuse at the underhood fuseblock is okay, and the signal lamps wont light or flash at all, and assuming the wirings & connectors are also okay, it could be your turn signal multifunction switch or your turn signal hazard flasher module that is faulty.

Feb 26, 2011 | 2006 GMC Envoy

1 Answer

My blinkers stopped working. At first I had to manually "blink" them, today they wont turn on. The hazards work fine. Its a 1992 roadmaster estate wagon.


Your fuse is blown or the flasher relay is defective or both. Check the fuse first and replace as nexessary. Note that this vehicle has 2 flasher relays, one for the turn signals and one for the hazard lights. The turn signal flasher relay is located on the driver's side, under the dash above the kick panel, mounted in the top of the fuse panel. The hazard relay is located same place on the bottom of the fuse panel so do not get them mixed up.

Oct 05, 2010 | 1992 Buick Roadmaster

1 Answer

My blinkers sometimes dont work? looked at the fuse and it seemed okay but i replaced it anyway..seemed to work fine for a couple months now its doing it again...could it be an electrical problem or turn...


Try replacing the Flasher Relay. It has 2 relays, one for the turn signals and one for the hazard lights. The one for the turn signals is located Front seating area, driver side, under dash, behind instrument panel, mounted on passenger side of steering column.
The hazard flasher is located Front seating area, driver side, under dash, above kick panel, mounted in top of convenience panel.
Replace the Turn signal flasher.
Curtorsey: Auto Zone.

Dec 11, 2009 | 1996 Buick Century

1 Answer

2001 jeep Tj pdc diagram trying to locate fuse for


sounds like it is either flasher or switch assembly.

Oct 08, 2009 | Jeep TJ Cars & Trucks

1 Answer

Have hazard lights but no running or turn signals


sounds like you need a combo flasher assembly..located in fuse block inside vehicle under steering column..there may be a plastic cover under dash you have to remove to see fuse block..large black relay that plugs into fuse block..if you pick up a new one,you will see what it looks like..available at dodge dealer..combo flasher or drl/signal relay

Jun 11, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...