- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That year Ciera came with two diiferent engines. if you have the 2.5 liter engine it is located under the hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block. If it is the 3.3 liter engine it is located under the hood, passenger side, lower engine area, front of crankshaft pulley, mounted in engine block. i hope this helps you and good luck.
What you should do when it stalls is check to see if your loosing spark at the plugs.If you are then you probably have a bad ignition module.It is located in the rear of the motor.The ignition coils are mounted on it.One other possibility is the pcm.It is located under the dash on the passengers side.You can get a used one at most salvage yards.You will need to get the number from the old pcm.You will also have to remove the old prom from the old pcm and install it in the one you get for replacement.Hope this helps.Good luck.
with a 3.1 liter , remove and install directions are remove serpentine belt , remove power steering pump assembly , then remove sensor harness , sensor bolt , remove sensor , so it sounds like behind the power steering pump assembly area if that makes sense . it has to be real close the the cam gear , you should be able to find it .