Question about Subaru Legacy

1 Answer

I order car engine from seller, i gave all codes and numbers of the engine that i need,i did pay true the bank, but i did not recieve any reciepe of mi purcase, after 2 months engine arived i went to pick up mi self, but when i came home i chect engine and it was not same like i ordered. i did call seller but he did not speak with me and start to send rude emails. i do not know wath to do and how to get mi money back.

Posted by on

  • yadayada
    yadayada May 11, 2010

    This is not the right place to answer this issue, call the seller and explain the problem, that is the 1st step, your reciept is the bank payment.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

If you paid thru a bank wire then there is really nothing you can do fighting it will probably cost more than you paid for engine.Save all your emails from him if bought tru ebay then contact ebay as well

Posted on Sep 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need to repl my O2 sensor bank 1 on my 2003 chevy tracker , where is it located

If four cylinder engine, sensor 1 should be in exhaust manifold. Your exhaust pipe connects to exhaust manifold.
If a v engine, the code would say bank1 sensor 1 or sensor 2. Bank 1 is the bank with number 1 piston in firing order.

Apr 24, 2018 | Cars & Trucks

2 Answers

I am looking for the firing order on a 2013 Dodge Journey that has a V6 3.6l VVT engine. Does anyone have a engine diagram for this year and engine specifically?

Click on the link, hope this helps.
The rear bank should be number 1 bank, your number 1 cylinder is in that bank.
The firing order should be 1 2 3 4 5 6.

Apr 10, 2018 | Dodge Cars & Trucks

1 Answer

99 merc cougar engine code po1744

P0174 is bank 2 lean.
To differentiate between bank 1 and bank 2, bank 1 has the number 1 cylinder in the firing order, the other bank is bank 2.
I looked at v6 2.5L engine, bank 2 should be the front bank, looking at the engine under the hood.
Are there any driveability issues? Everything off, unplug your maf sensor, where applicable, take it for a spin, if it does better have to check maf system.
If lean fuel trim code set under load, almost always, fuel pressure or volumn.

Apr 02, 2018 | Cars & Trucks

1 Answer

Need diagram for firing order on a 2001 Chevy Zr2 s10 truck 4.3

The firing order is 1 6 5 4 3 2

The driver side bank from front to back, cylinders numbered, 1 3 5.
Passenger side bank from front to back, cylinders numbered, 2 4 6.
engine code w and x.

Mar 12, 2018 | Cars & Trucks

1 Answer

I have a 2011 Ford Escape and the check engine light came and the code D 2196 came up what is that for and how do I fix it?

code indicates there is too much fuel in the exhaust measured by bank 1 sensor 1. Bank 1 is the bank of cylinders that contains the number one cylinder. Sensor 1 is the sensor that is before the catalytic converter.
you don't say what engine?
here's the info so you'll know where #1 is...2.5L 3.0L etc

Feb 04, 2018 | Ford Cars & Trucks

1 Answer

2002 malibu 3100 engine i need number 1 thru 6 cylinders

The engine is mounted transversely (sideways)-the front of the engine is on the passenger side where the serpentine belt runs. On the backside bank, bank one, closest to the firewall, are cylinders 1-3-5, from front of engine to rear. So number one cylinder is on the back bank, and nearest to the passenger side of the car (bank simply refers to which side of the engine on a v6 or v8, bank one or bank two. Bank one is always the side where the #1 cylinder is located, and bank two is the opposite side.) On the front bank or radiator side, bank two, the cylinders are 2-4-6, front to back of engine.

The firing order is 1-2-3-4-5-6, easy to remember.

Dec 15, 2015 | Cars & Trucks

1 Answer

I need a diagram for the firing order on a 2006 Cadillac DTs 4.6

The Northstar V8 VIN Code 9 or Y is a 4.6L engine. The cylinders are arranged in 2 banks of 4 with a 90 degrees included angle. The left (front) bank of cylinders are number 2-4-6-8 and the right (rear) bank cylinders are 1-3-5-7. Engine firing order is 1-2-7-3-4-5-6-8.

Sep 10, 2014 | 2006 Cadillac DTS

2 Answers

I left my mechanic tune up my 2005 S40 after

P0172=System Too Rich Bank 1,
This is the info that an O2 sensor is telling the computer,This would require checking out the O2 sensor,As far as the spark plug question,What he wants to order is not what the manufacturer suggest for your car.You just paying more for a fancy type racing plug.

Jan 24, 2010 | 2005 Volvo S40

2 Answers

Engine light is on. seller said it is a sensor, could this be true?

Sure, but WHICH sensor? If thats all it needs , get the seller to pay for the repairs. Dont buy it until its either fixed, or you have a qualified repair shop diagnose and give you an estimate for repairs.

Nov 05, 2009 | 1997 Lexus ES 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Brandon Johnson
Brandon Johnson

Level 2 Expert

251 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides