Question about 1997 Mazda Protege

2 Answers

Madza protege timing belt and chain setting double overhead 1997

Posted by on

  • 4 more comments 
  • glenford bain Sep 10, 2008

    1,8l engine

  • glenford bain Sep 10, 2008

    need help in setting the timing chain and belt on a madza protege 1997 1.8liters need a skematic of the timing setting urgent i live 20 miles out of the town of belize city glenford in belize

  • glenford bain Sep 10, 2008

    from bainsville in belize PROBLEM SOLVE THANKS TO ALL ON FIXYA.COM MY NEW FRIENDS GLENFORD IN BELIZE BIG UP///

  • glenford bain Sep 10, 2008

    hi everyone on fixya.com i am back with a headache need help again infomation follows//////madza protoge 1996 dohc engine displacement 90.9 cu. in. familyttk 1.5 liters vjgfek need help in identifying the markers to set the chain first then the belt for the timimg please assist it carries a chain for the cam shaft and a belt for the crank shaft i want to set them iin the right order////

  • glenford bain Sep 10, 2008

    will start tomorrow too latye now to work but it is all good glenford in belize

  • M Trent May 11, 2010

    Is it a 1.5L or 1.8L engine because both are dohc engines?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

madza protege - 748b22e.gif this

Posted on Sep 10, 2008

  • 2 more comments 
  • M Trent Sep 10, 2008

    these are the timing marks for the timing belt. in pic 2 it has #1 - # 5 this is the way you put on the belt in this order.

  • M Trent Sep 10, 2008

    this is for timing chain .

  • M Trent Sep 10, 2008

    timing belt marks. hope this helps.

  • M Trent Sep 10, 2008

    timing belt installation

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you get the 1997 mazda protege timing belt settings?

Posted on Nov 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Does my Suzuki Grand Vitara have timing belt or chain 1.6 2006


That engine is a 4 cylinder and they all have belts.

Feb 17, 2015 | Suzuki Cars & Trucks

1 Answer

Timing chain


If you have a double overhead cam V-8, there were recalls on this design. Rather than the timing chain, a part called a "Cam Phaser" is usually the problem. I would read articles about the Phaser and see the solutions. Even the shortcut is an expensive fix with the long method costing well over $2000.

Dec 15, 2013 | 2004 Mercury Mountaineer

1 Answer

Have taken off water pumped might have knocked a 91 mazda protege out of time ,how do i find engine marks to reset the timming


Hello- Yes, you have to remove the timing belt in order to remove the water pump. If the belt was just placed back on the pulley without setting the timing marks, then the engine is out of time. There were two engine types that your Mazda could have been equiped with; a single overhead cam or a double overhead cam (you did not mention which). In any case, do not try to start the engine anymore, you could damage the valves due to piston to valve clearence caused by the engine to be out of time. Comment back with the engine type and/or if more assistance is needed.

Sep 10, 2011 | Mazda Protege Cars & Trucks

1 Answer

What size engines did they come out with ?


Only one engine that year. A 1.8 four cylinder double overhead cam. DOHC. Also known as 1ZZ-FE with a silent timing chain, not a timing belt. Gasoline engine.

Feb 18, 2011 | 1998 Toyota Corolla

2 Answers

Does Mazda protege 1997 has time belt or time chain? Do i need change it now? My car has 75,000 mileages


im sitting here thinking?if its inclosed its a chain,if open at the top its a belt.mazda are part of the ford group and they changed/went back to the chain but im not sure what year im sure it was 97 but what month im lost.adrian,,

Nov 29, 2010 | 1997 Mazda Protege

1 Answer

How do I change the valve cover gasket?


I just changed mine two days ago.I have a 1994 Protege DX and the VIN number says it's a DOHC. It does have two overhead cams BUT the value gasket is for the SOHC. My gasket has 6 holes.... just double check.

Simply loosen the six 10mm bolts and don't forget the 10mm bolt left side holding the timing belt cover in place. Disconnect the two rubber hoses and each end of the valve cover. I used a small screw driver to try out the old gasket. reverse process.

Mar 30, 2010 | 1994 Mazda Protege

1 Answer

Need a diagram for 2000 madza relpacing timing broken belt.


Click on the following Link. It will take you directly to all the Diagrams you will need.
Before clicking, let me know if this helped you.

http://www.2carpros.com/car_repair_information/year/2000/make/mazda/model/protege/2000_mazda_protege_timing_belt_diagram_marks.htm

Feb 01, 2010 | 2000 Mazda Protege

2 Answers

Does it have a timing chain or a timing belt


Hello.
In 1997 the Sunfire used 2 different engines.
A 2.4 overhead cam or a 2.2 overhead valve engine.
Both use a timing chain setup.
Hope this helps you along.
Best of the season to you.

KL

Dec 24, 2009 | 1997 Pontiac Sunfire

2 Answers

How many miles before we should change the cam belt on a honda civic gtec 2001


The service book will tell you the answer you want but if you havent got it then its between 50,000 and 70.000 miles ..

Nov 24, 2009 | 2004 Honda Civic

1 Answer

Readiness monitor codes for a 1997 mazda protege 1.5 dohc


i got a 1997 madza protege 1.5L and i was wondering if i could fit a 2003 madza 3 2.0L engine into it cuz i need more power can someone answer this for me plz asap???

Aug 01, 2008 | 1997 Mazda Protege

Not finding what you are looking for?
1997 Mazda Protege Logo

Related Topics:

2,143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...