At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have power window switches on both the driver and passenger panels. Passanger window does not move. I checked the passanger switch and have 12 volts to switch; however, on the brown wire to the motor no power. Thinking the problem is in switch. However before I replace the switch I was wondering why the switch on the drivers side doesn't open the window. I know there are 5 wires to the switch and does one of them come from the drivers door swich and bypass the passenger switch to the motor. Finally how do I definative determine if the switch is bad?
thanks CB
Re: I have power window switches on both the driver and...
POWER GOES TO THE DRIVERS DOOR TO OPERATE BOTH ;RUNS MOTER ON PASSINGER DOOR; PASSINGER DOOR RUNS IT`S OWN POWER; CHECK CONNUITY IN THE SWITCHES AS YOU PUT THEM IN THE OFF ON POSITIONS !?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The same thing happend with my 94 lesabre. I thought it was the switch but i realized that the switch was fine. I went at the junk yard and got my self a power window motor. That is proboably what is wrong with your windows. I recommend that you get yourself new or used window motors and that sould do it!
if you have fully charged battery and you are having this problem well i would take the door panel off and watch it operate make sure every thing is moving smoothly and lubed if you can switch the switches from passenger to drivers test both see if the drivers window operates normal same with other side if no change then yes find new motor on craigs list .com hope this helps you out
Doubt it is a relay,all but one window works! Are you just going to buy a new one,without knowing if it is the problem?
Check the pass window switch.
Switch,okey,remove door panel and check out motor
If you have a multimeter you can go to the underside of the master panel in the drivers door and independently check the switches for voltage or with no power to the switch assembly check for continuity. Good place to start. If you get continuity to through the switch then you need to check power to the window actuators in the doors.
Now you do not have any response at all up, or down ?
I would say fuse has been blown to that side, but the bigger problem is that I believe the window motor more than likely has failed.
You will have to remove the door pad and using a volt meter find if you have 12 volts to the motor while operating the switch.
If you have 12 volts, then I would say motor is bad.
If you do not have 12 volts, then I would trace wiring back to switch, look for continuity.
Please let me know what you find.
you can test the voltage that comes out of the switch, if no voltage, then switch is bad. If there is 12 volts coming out then the motor is bad or dirty.
×