- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check wheel bearings. Properly jack up the car one side at a time with blocks set in front of and behind the front wheels with the car in Park. Do not set the parking brake as this will prevent the rear wheels from being spun while off the ground. Safety consideration--- Do not get any body parts between the wheel and finder or under the car in case it slips off the jack---- After one rear wheel is slightly off the ground begin to spin it and listen for rough / dry/ popping noises or break pad drag. See if the noise gets louder when you spin it faster or one direction versus the other. Check for loose bearing by trying to wiggle the tire side to side and top to bottom. Pay attention to tire wear. If you find nothing in the wheel itself, the tire might be the problem if the tread is worn oddly. You can change that tire's position with another wheel and see if the noise changes to the tire's new location. Repeat by checking the other side.
with the car parked, rub your hand over the treads of your tire...unusually bumpy? compare to the fronts... if a tire is out of balance, esp. in the rear, it can make alot of noise... solution is to replace tire and rebalance
hi how are you.there is a couple of things that will cause a rubbing sound.if it is a high pich sound then look at your dust cover behind your brake rotor.a low pich or a growling noise check your wheel bearing/hub assembly.with wheel off the ground wiggle it side to side and up and down you will have alot of play.or there is something hitting the tire.