Question about 2006 Mitsubishi Colt

1 Answer

Car alarm not activating central locking

Hi, after fitting my car alarm I can't get it to activate the central locking, any ideas which wires I should be connecting the alarm to the central locking?

Posted by on

  • Victor Oganne Dec 09, 2008

    Hi.

    My car alarm and central locking system works well most of the time.It was in two occations when i parked the car and locked it using the remote as ussual and it locked well.When i came back later the remote could not unlock the car but the alarm sound was coming in all the time when i pressed the remote but the doors were not unlocking.I had to call the dealers to force the door open and after that the remote started working fine.

  • Anonymous Mar 20, 2014

    hi i am trying to install a remote central locking kit, i know the wires running to the drivers door lock are : brown with a yellow stripe, blue with black stripe silver dots, blue with red stripe silver dots, and a black and red stripe wire. i think the system is running a negative trigger but i'm not 100% sure. any help would be greatly appreciated as i cant find a wiring guide anywhere

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

It means that the remote is not passing the signal to the car . The alarm has triggered because the system has detected an illegal entry. Replace the remote batteries

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda 2 (2004) central locking and alarm fault. My


how can i find central locking in mazda premacy tell me plsss

Oct 01, 2013 | Mazda Cars & Trucks

1 Answer

Alarm Problems


press the key twice to activate the alarm

Nov 13, 2009 | 2002 Volvo S40

1 Answer

Remote central locking is not working.the battery in the remote is working but when i press on locking there is no response at all from the car and the light on the dashboard does not flash,any ideas?


check the alarm and central locking computer on your right of the steering wheel , unlock it and reset it after 1 hour you can try again and it should be reset and the alarm will sound if its active.

Oct 10, 2009 | 2000 Alfa Romeo 156

1 Answer

Central locking not being activated by remote


somehow the car when on valet mode, go to a alarm shop , they should be able to re arm your car without to much damage to your pocket, or read your cars manual, it might inform you on how to fix the problem.

Sep 23, 2009 | 1998 Toyota Corolla

1 Answer

Toyota avensis 1998 cdx key fob can't activate immobiliser


Not a solution just another problem...Lost my car fob key, have a replacement key no circuit. As I open door, sets off immobiliser like above for20 mins. I had someone look under the glove compartment but that got me no joy. How can I (non techy) resolve this so I can drive my baby home...Vreg Avensis1.8 model?
many thanks

Aug 31, 2009 | 1998 Toyota Avalon

1 Answer

How do you know when your computer box is faulty?


de activate the immobiliser.easy to do on this car ,just done one with similar problems but hazards came on as well.or take car to dealer and get keycode /alarm immobiliser reset,its a lot less hassle

Nov 20, 2008 | 1999 Daewoo Nubira

1 Answer

Central locking not working


Firstly establish if your c/locking is factory fitted or after market. If factory fitted check the fuse box for any blown fuses. If after market then their is a fused +12v line running to a normally black unit which controls the C/Locking, check that. If no luck with that take it to a fitment center who can diagnose that within 5 minutes

Nov 12, 2008 | 1994 Toyota 4Runner

3 Answers

Cow boy alarm fitter came to fit alarm.When came to pick car up cenral locking did not work. he didnt no what he had done. So i had my car back with out paying 3 days later . I have now taken alarm of...


Try to check wires to the driverside central lock master motor. alarm installer probaly cut wires inorder to link the alarm to your cars central locking system.

Central lock master motor usually comes with 5 wires, two is the motor supply wire capable of reversing its polarity depending on lock or unlock request, the remaining 3 is just a swtich. One is ground and the two are negative request swtich for lock and unlock. If all fuses were good this moght be the problem, try also to check the outside fuses- in the hood. Good luck!

Aug 25, 2008 | Mitsubishi Lancer Evolution Cars & Trucks

Not finding what you are looking for?
2006 Mitsubishi Colt Logo

684 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...