Question about 1989 Ford Taurus

1 Answer

1989 ford taurus 2.5 eng.water pump removal / install

Can you send me pictures on how to unbolt and install a water pump ?
Thanks,
Robert

Posted by on

  • 12ricci Sep 10, 2008

    Problem: 1989 ford taurus 2.5 eng.water pump removal / install
    posted by 12ricci on 09/10/2008

    Can you send me pictures on how to unbolt and install a water pump ?
    Thanks,
    Robert

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

Robert

Please inspect this article for help in your problem, I think that it will provide you with excellent help!

Regards

Brian

Posted on Sep 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a water pump on a 2004 ford taurus


Wanda, Check out the video and links I posted to see how to remove and replace Taurus water pump.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Install Water Pump Ford 3 0L V6 FWD WP 9038 AW4094
Ford Taurus Water pump Replacement
Need step by step water pump change
2004 Ford Taurus water pump Google Search

May 31, 2016 | 2004 Ford Taurus

1 Answer

Need to replace water pump on 2003 ford taurus


For replacing water pump , you also have to remove, accessory belt,timing belt,timing belt cover and other minor components. Removing water pump is not very difficult, but removal of this other components is necessary, then only you can replace water pump. For detailed procedure, click the link below:--- http://technoanswers.blogspot.com/2011/10/water-pump-removal-instructions-for.html -------- This should help.Thanks.Helpmech.

Oct 28, 2011 | 2003 Ford Taurus

1 Answer

How to replace water pump of 1976 ford e-250


Hello, follow this steps to replace the water pump:

1. Disconnect the negative battery cable,using a screwdriver to unscrew the clamp that secures the cable to the negative (-) post. Pull the cable away from the battery post.
2. Use a jack to elevate the Ford Taurus and use jack stands to shore up the jack. Alternately, you can use tire ramps.

3. Discharge the pressure in the radiator by unscrewing the cap. Remove the drain plug located underneath the radiator. Catch the coolant in a resealable container. Clean up any spills.

4. Disconnect or remove the parts in front of the water pump, using an adjustable wrench. In order, this includes the right inner splash shield, lower heater hose, upper and lower tube bolts from radiator, air cleaner assembly, battery and battery tray, water pump belt, upper radiator hose, engine vent hose, trans axle 10-pin connector, radiator bypass hose and thermostat housing.

5. Remove the water pump mounting nuts and connector hose. Unbolt the water pump from the mount. Clean off the mounting area with a shop rag.

INSTALLING THE NEW WATER PUMP:

1. Inspect the new water pump to ensure it's identical to the old pump and free of any metal splinters or debris.

2. Arrange the new gasket onto the water pump. Place a bead of high temperature automotive sealant around the area where you removed the old pump and hold the gasket in place on the new water pump as you mount the entire assembly on top of the sealant.

3. Place the new nuts into the holes in the Ford Taurus' water pump in any order for the S-type engine and in a cross configuration on the U-type engine. Using a torque wrench while the sealant is still wet to obtain a better hold, tighten to 15 foot pounds of torque.

4. Reassemble the other engine parts in the order they came off the Ford using an adjustable wrench. Replace worn parts with new ones, as needed.

5. Replace the drain plug and refill the radiator with the amount and type of coolant specified in your owner's manual. Remove the jack stands and release the jack or drive the ford off the tire ramps.

6. Attach the negative battery cable to the post and tighten the screw on the clamp. Start the engine and check for leaks. Then, close the hood

Thanks










































Jul 28, 2010 | Ford E-250 Cars & Trucks

1 Answer

Have to replace water pump on 98 Ford Taurus. Any hints or suggestions would be appreciated before I get out in the snow and cold to fix this.


You can change the water pump by doing these steps:

  • With the engine off and cold, o pen the hood and locate the vehicle’s radiator and water pump.
  • Remove the radiator cap.
  • Install a pressure tester on the radiator. Apply the pressure indicated on the radiator cap or in the owner’s manual.
  • Inspect the water pump for leaks. Remove the pressure tester.
  • Place a drain pan under the radiator. Open the drain valve or remove the lower radiator hose to drain the cooling system.
  • Remove the drive belts or serpentine belt.
  • Remove any hoses connected to the water pump.
  • Unbolt the water pump from the engine. Remove the water pump.
  • Using a gasket scraper, clean the mounting surface on the engine block.
  • Install a new gasket and attach the new water pump to the engine with the original mounting bolts. Tighten the bolts to the manufacturer’s specifications.
  • Re-install any hoses and belts that were removed.
  • Re-install the drain plug or lower radiator hose.
  • Refill the radiator with a 50/50 mix of coolant and distilled water. Pressure test the cooling system and check for leaks.
  • Check and fill the overflow reservoir with coolant.
  • Leave the radiator cap off and start the engine. Idle the engine to remove trapped air from the cooling system. Add coolant if necessary.
  • Install the radiator cap.
  • Road test the vehicle and monitor the temperature gauge. If the vehicle runs hot, there may be an air pocket in the cooling system. Allow the engine to cool off and add the necessary coolant.

Feb 12, 2010 | 1998 Ford Taurus

1 Answer

2002 ford taurus wtaer pump


Removal & Installation 3.0L (2V) To Remove:
  1. Drain the engine cooling system.
  2. Loosen the water pump pulley.
  3. Remove the bolt and the nut and position the roll restrictor bracket out of the way.
  4. Remove the accessory drive belt.
  5. Remove the generator.
  6. Remove the bolt and the accessory drive belt tensioner.
  7. Remove the nut, the bolt and the support bracket.
  8. Remove the bolts and the water pump pulley.
  9. Disconnect the water pump inlet hose and the crankshaft position sensor electrical connector.
  10. Remove the bolts and the water pump, and clean the sealing surfaces
To Install:
  1. Install the water pump. Tighten bolts in the sequence shown:
    1. Tighten numbers 1-7 to 18 ft.-lbs. (25 Nm)
    2. Tighten numbers 8-12 to 89 in.-lbs. (10 Nm)
    3. Connect the crankshaft position sensor electrical connector and the water pump inlet hose
    4. Install the support bracket.
    5. Install the accessory drive shaft tensioner.
    6. Install the generator.
    7. Install the roll restrictor bracket, bolt and the nut.
    8. Install the water pump pulley.
    9. Install the accessory drive belt.
    10. Connect the battery ground cable.
    11. Fill the engine cooling system.

9de9feb.gif
Water pump bolt torque sequence (3.0L (2V) engine)

Jul 04, 2009 | 2002 Ford Taurus

1 Answer

How to install new water pump on 1989 mercedes 300e


Drain the coolant
Remove air cleaner assembly
Disconnect water hoses from radiator
Remove drive belt
Remove power steering pump
Remove water pump drive pulley
Loosten hose clamps on cylinder head tp water pump cooling line
Remove water pump mounting bolts and water pump

Just reverse these procedures to install new pump.



Mar 19, 2009 | 1989 Mercedes-Benz 300-Class

1 Answer

Water pump


A manual will have pictures and everything.
Just replaced mine. Five bolts in bracket holding tension idler, A/C compressor (if applicable) and power steering pump must be removed to access 3 bolts in water pump. Just push aside enough to access remaining bolts. Email at dabeam@sbcglobal.net if additional info is needed. Also, diagram serpentine belt before removing. Took me at least 15 attempts and 20 minutes to figure out

Jun 25, 2008 | 1989 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...