Question about 2000 Jaguar S-Type

1 Answer

No acceleration when placing car into drive the failsafe engine warning light comes on and the car will not accelerate. Is this the transmission problem or one of the selenoids?

Posted by on

  • Lizbeth Benson
    Lizbeth Benson Feb 13, 2009

    my s type drives fine, under 40 mph, but when I try to accelerate, it starts to buck, and the check engine light flashes, then goes away, what could it be

  • Lizbeth Benson
    Lizbeth Benson Feb 13, 2009

    My 2000 type jaguar drives fine under 40 mph, but when I accelerate, it starts to buck, the check engine light comes on flashing yellow, but when I slow down, it goes off...what could it be

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

This means there is a problem with the way its running, and it does not want you to drive it, its a safety feature to prevent further damage, take it to autoshop

Posted on Sep 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Mercury Sable just stopped accelerating when driving and the transmission light came on. I put transmission fluid in and it still will not accelerate. Any suggestions


try running the fault codes to find the sensor/servo/ solenoid that is not working
if it drives but does not accelerate it could be a servo /solenoid or a TCM failure no communicating with the ecm due to bad harness connections or other wiring problem

Jul 05, 2016 | 2006 Mercury Sable

1 Answer

Acceleration problem


have you checked the engine oil level ?

Jan 25, 2014 | Nissan Maxima Cars & Trucks

1 Answer

2004 Audi Allroad - At start-up, self-check is fine ("OK"). Upon accelerating, ESP warning light comes on as speed exceeds 25 mph, and engine "stutters". If I slow down, or don't hit 25 in the first place,...


AWD vehicles likes its tires to be within 1/8 of an inch wear difference. Uneven tires cause problems with the transmission and drivetrain. ESP traction control with its speed sensors etc: could get varying reading with tires of different thread wear.

Nov 09, 2013 | Audi Cars & Trucks

1 Answer

Engine light comes on and no acceleration response with my Camry ate a 2002


There should be codes thrown when this happening. Go to a local parts store and have them toss a decoder on it. They should be able to tell you what the code is and what part may be causing it. No acceleration sounds like the computer places the car in "limp" mode.

Jul 22, 2012 | 2002 Toyota Camry

1 Answer

Vauxhall Astra 1.6 engine warning light came on and the car won't accelerate. Took to mechanic twice for car not accelerating when stepping on the accelerator. They replaced the accelerator peda


Unfortunateley there are lots of things that can cause this and they will all send the car into limp mode. The only way to get to the bottom of what is wrong is to get a diagnostic check carried out and obtain any fault codes and the systems they relate to. Has the fuel filter been replaced as a blockage in this can cause lack of power.

Jun 10, 2012 | Vauxhall Astra Cars & Trucks

1 Answer

P0732


This is caused by a sticking or defective 2nd gear electric shift solenoid.
P0732 NISSAN - 2nd. Gear Malfunction
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Incorrect transmission shifting Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

Jan 16, 2012 | Nissan Pathfinder Cars & Trucks

3 Answers

ECM memmory was reset on Toyota RAV4 2006 model. Since then engine warning light and 4wd light comes on. Carman scanner reads P1589 Accelerator sensor learning value and C1280 Engine control system...


ECM memmory was reset on toyota estima 2008 model. Since then engine warning light and 4WD light come on. toyota scanner reads P1589 ACCELERATOR SENSOR LEARNING VALUE. can you assist

Oct 07, 2010 | Toyota RAV4 Cars & Trucks

2 Answers

BMW X5 2004 TRANS FAILSAFE PROG


Hi; If I get the 'Trans Failsafe Prog" message twice within about 2 hours, The SES light will go on automatically. Since I do not seem to have any real transmission problems, this SES message clears itself in about 24 hours. The "Trans Failsafe Prog" messageseems to be used to indicate other transmission problems as well, like loss of transmission fluid, so be careful. I have a 2002 X5. Cheers. Omer

Dec 31, 2009 | 2002 BMW 5 Series

1 Answer

06 Expedition Engine fail safe mode


truck needs to be scanned for the codes,most major parts stores will do this for little or no charge,get back to me with the codes and we'll go from there

May 15, 2009 | 2006 Ford Expedition

Not finding what you are looking for?
2000 Jaguar S-Type Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Raygin
Raygin

Level 2 Expert

322 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...