At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Can I get a belt routing diagram for a 2006 Chevy...
Http://www.yourcobalt.com/forums/install-guides-diy/18532-how-change-serpentine-belt-2-2-a.html
This link has pictures of each pulley. Hopefully it is enough for you to finish your job
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is going to sound a little odd, but properly jack the car and then try opening this door. Put the jack in the recommended jacking spot on the passenger side.
Imagine that the back and front ends of the car are compressing the center of the car. By lifting one end or the other, the center may shift. Otherwise you do not have a frame, but the engine cradle may have a support located closer to the center of the vehicle. Do not jack the sheet metal, but you may catch the cradle and apply lift there.
You may notice by putting in a piece of cardboard in the doorjam on whether there is an increasing gap as you jack the car.
check all pullys make sure they turn freely they're not loose or bent
pu a new belt refer to the belt routing diagram on top of the radiator
you may want an extra pair of hands to hold the tensioner while
you install the belt.
thats the best i got with limited info hope it helps any other ? gimme a
shout good luck
×