- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://books.google.com/books?isbn=1305176421 Jack Erjavec, Rob Thompson - 2014 - Technology & Engineering
... network failure Burned out lamp elements Faulty controller Faulty headlight switchinput ... Glove Box Light Opening the glove box door closes the glove box light switch ... LEDs are often used for interior lighting and custom colors can be often selected ... Editorial review has deemed that any suppressed content does not ...
Tested all relays and fuses, Running Light Assy Relay behind glove box burnt. Installed a ... When I turn lights on manually, all dash lights go out-- unable to read speedometer or any other dash indicators .... Engine indicter yellow light does not go off after starting of engine ... Rear oxygen sensor can cause emissions failure.
Mar 28, 2015 - Uploaded by Redline Revs
Seat Leon, VW Golf mk4, Audi, Skoda - if your interior lights, electric windows, remote ... If you still can't fix ...
on some LC some series #, unstated. and can vary by country sold to.
there are 3.boxes 2 in cab and one in the bay(engine)
the operators guide in the glove box shows them. lost that?
or alldata.com (USA cars)
as does the FSM , from Toyota. (market matched)
use a flash light and find them easy, .
tell country and series
then tell engine option (some have 10 options world wide)
the engine will have unique fuse names, and locations.
the cars oper, guide, matched your car new.
so if lost only the FSM can sort out all these options.
everyone loses the oper guide, for me its the first buy, day 2.
then day 3 , the fsm. then the full parts list.
It likely had water on the ignition system. The check engine light will flash for misfire. The VSC light is on just because the check engine light is on. You likely have it dried out now and its fine. You just need to clear the codes. Autozone will do this for free.
1994-99 BUICK LESABRE
CHANGE OIL SOON Light
1. CHANGE OIL SOON light will come on when engine oil has broken down enough to require changing. After changing oil, reset oil life display.
2. To reset light, turn ignition on. Open glove box to access oil reset button. Press and hold oil reset button in glove box for at least 5 seconds, but not longer
than 60 seconds. The CHANGE OIL SOON light will flash 4 times to indicate light has been reset.
I hope you havn't power cleaned the engine at any stage,,,,,, Check for moisture or even water in the spark plug wells . The HT leads should be tight ,clean , dry and not overlapping ie a HT lead seperator should be able to keep leads from touching and a possible mis fire.
I own a 2004 LS. You didn't get water into the PCM,because of rain or anything else. The PCM is behind the glove box,only the connectors are in the engine compartment and their under the housing for the cabin filter. They won't even get wet from rain.
The battery could fail any time,after say three years,for any reason.
Don't know about warranty,ordered mine from factory in 03.