Question about 1994 Saab 900

3 Answers

Radio code Thanks for idea. but they all seem to require that I know what the code is and I don't. Once I have the code I know how to enter it. Thanks

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Did you pull the radio out and look on the back?

Posted on Jun 23, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

In order to get the code, you need the serial number and the PU number on the back of the unit. Then, call around to dealership service departments asking for them to look up the code for you. Most will tell you to bring the car in to them, just keep trying different dealers. One will give you the correct code. Oh, to reset the incorrect code, press and hold the band button.
Justin
Strictly Saab
Melbourne, FL

Posted on Sep 16, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Try to look in the packet that came with the car - it's usually in the glovebox - there should be a plastic card with the vehicles id number and the code you'd enter for the radio. I don't know if there's another way to reset that other than disconnecting & reconnecting the battery.

Code 3231, 0100, 1123, 3179, 3343, I do not know if it will works for your radio, try it..maybe it might work for you.

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently got a renault clio etoile auto (W reg) , and having problems entering to code for my radio, i have the code and i know how to enter it but the numbers wont seem to change when i attempt to enter...


Hi Ivy, Try pulling the fuse for the radio and leaving it removed for a few minutes. Replace the fuse and try again with the reset code. Regards John

Dec 09, 2012 | Cars & Trucks

1 Answer

Need to know how to enter radio code Suzuki 2006 Grand Vitara, have code, don't know how to enter


In your owners manuel, theres a card. Looks like a credit card, white with a light green stripe. (atleast mine is) Theres a 4 diget code on it
thats the code. If you lost it, the dealer can suply you with it.

To enter the code (the radio probably shows C0d----) use the numbers that your radio has for its preset stations

Sep 20, 2012 | Cars & Trucks

1 Answer

How do i install a new radio


The process is very simple, just follow these steps and you'll be on your way to listening to your radio again. First of all don't think you need to unscrew anything. The wood panel surrounding your stereo snaps out by pulling on it or using a flat screw driver at the corners. Once you have taken the panel out, you can see that the radio is held in by 2 hooks. Push up and pull forward slightly. You don't have to pull out the entire radio because you can see the serial number on the top surface very easily. Write down the number next to where it reads s/n. Once you have the serial number, call the local dealership and give them your serial number. They will in turn give you a four digit code number that you will enter on your radio. One thing to note is that if you have entered the wrong code number 3 times, your radio would lock up and it would read "OFF". To unlock it, simply park your vehicle in a safe place and leave the radio on for about 1 hour (no engine running just click the ignition switch to operate the radio). After one hour, the radio resets and will ask you again to enter the code. start entering one number at a time using the first 4 buttons. Example, if your code is 4538, you would push button 1 four times to get to the number 4, you would push button 2 five times to get to the number five and so on.. After you have entered the correct code, push the CD button and there you have it.

Feb 22, 2012 | 2002 Mitsubishi Galant

1 Answer

I changed the battery in my 1997 Discovery and the radio needs to be reset. The local dealer gave me a 7 digit code, but they don't know the procedure for entering it. Any ideas?


So if you were to pay a dealer for their time & have it
taken into the service bay, not a single tech could put
in a radio code
That is pure non sense

Sorry, I had to say something & I don't have your owners
manual or any other material to help you

Try asking another dealer, or see if you can have it
done with a scan tool at a local repair shop

Aug 06, 2011 | 1997 Land Rover Discovery

1 Answer

Just bough the truck,the loc is on the radio.how can i unlock it. don't know the code for it. thanks for any help!


Taken from:
http://autoforumz.com/Pontiac-Help-u...pict40505.html

GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
the
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
you
to press "2" for Pontiac, press 206010 and hit the # key. He'll ask
you
for the 6 digit code that you've written down. Enter that and press
the
* key. He will then give you a code, and the option to get additional
4
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
until
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
the
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
and
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
receive
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck, and yes, it
does work.

If this doesn't work, you'll have to physically take the truck to a GM dealership, or purchase a new radio.

May 18, 2011 | 2002 GMC Sierra 1500

1 Answer

I have a 1998 mitsubishi eclipse gst. had the battery chanced and now the radio won't work. have code for radio but don't know how to enter it into radio.don't know what buttons to push. owned car about 7...


The 1,2,3,4 preset buttons on your radio toggle up only through the digits 0-9. The 1 preset button is the first digit holder, and so on for the 4 digit code. If you go too far just keep pressing the button, and it will go back to 0, and you can get back to the right number. If your unlock code has a 0 in it you have to press the button once to get to 0. It starts with a dash (-). This doesn't count as the 0. For instance if your unlock code is 0873, you will press preset 1 once, preset 2 9x, preset 3 8x, and preset 4 4x. Once you have the correct number in the display press the "CD" button, and it will unlock your radio. If you didn't do it right, it will display "ERR1" before going back to the "CODE" display. Don't mess up more than twice. After the third failed try things get a lot more complicated. Good Luck Tim

Apr 17, 2011 | 1998 Mitsubishi Eclipse

1 Answer

2004 honda odessey radio code


Need to reenter the radio code, it's normally located in the glove box or behind the radio itself, once found you should have about 3 tries to enter the code, if more attempts are needed, disconnect the neg battery cable for 5 minutes and retry.

Feb 07, 2010 | 2002 Honda Odyssey

1 Answer

How do i get the cod to enter the code on my radio


have you got radio code & if its saying code you need to leave on until 4 digits appear once they appear to put code in for example if code was 3313 you would press no 1 on your panel 3 times then you would press no 2 again 3 times no 3 once & no 4 3 times once you have done that press no 5 to enter code if all goes well your radio should work ok if not you might have wrong radio code let me know how you get on.

Feb 02, 2009 | 2001 Ford Focus

1 Answer

I BROUGHT A AUDI 2000 A6 4.2 SAFE RADIO


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Nov 22, 2008 | 2000 Audi A6

4 Answers

98 Audi A4 Entering radio Code


This solution is close, but not accurate for my 1998 A4 2.8. You press and hold FM2 and RDS until the display indicates 1000. Immediately release. Then enter code with radio numbers 1 through 4, pressing each one till you get the first no. of the code, then for 2, press till you get second no. of code, etc. The press and hold FM2 and RDS until radio comes on.

Jun 07, 2008 | 1998 Audi A4

Not finding what you are looking for?
1994 Saab 900 Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

rgbypoet

Level 2 Expert

161 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...