The button will not depress to release the gear from park. This happens only in cold weather! early summer the car was flooded!!!
could it be that the relay switch is sticking on the brake peddle-- or would it be the connections in the plastic buttion on the stick shift!!! questions questions ...
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
that is park lock failure, build into the shifter section,it has an
electric solenoid lock. and a bypass button.
in the glove box, see oper. guide, it tells you where the erg. release
button location, and varies by sub body type and options.
its hidden cover, or a slot, on most cars. the slot type is to insert
any key in slot and push. bang, it opens (brake set,etc)
That happens all over the world and thats because of the cold weather that affect the gear shifter Solenoid that releases the shifter after you press the brake pedal and when its cold the the solenoid get stuck. you might wanna check it or changed if need be. Good luck
There are multiple things that must all happen in order for the shifter to move from park.
1. Make sure the key ignition switch is in the "Run" position (the position just before the "start" position).
2. Brake pedal is depressed (usually pushed in a couple of inches or more at least to release the button on the shifter).
3. Push in the button on the shifter and pull back (you may need to push the shifter slightly forward or back a little for the button to move freely).
If the button on the shifter still doesn't push in freely, there is a problem with the mechanical lock-out linkage or electronic switch that releases the button lock. Check under the dash area along the brake pedal arm for anything that doesn't look correct.
4. If the car is on an incline/slope/hill, it will put a lot of pressure on the parking pin in the transmission. Usually a strong tug or pull on the shifter will pull it out while you're pushing on the brake pedal to prevent rolling when it releases. Make sure to set the parking/emergency brake first to prevent this next time .
Not sure that this is the solution, but I found a work around on my Durango. If you take off the cover on the shifter there is a lever (button) that you can dislodge and the vehicle will release out of park. After I did this a couple of times, I haven't had the issue happen again.