Question about 2006 Dodge Sprinter

1 Answer

Resetting the mileage readout for changing oil, brakes, etc.

What is the procedure for resetting the amount of miles between oil changes, etc. on the dashboard indicators?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

If this is a 2006 or old sprinter....turn the key on...push the button that changes the reading from odometer to trip to sevice interval ....til interval shows...turn key off...push button and hold it....while holding button turn key back on....hold it til interval resets

Posted on Sep 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset allreadouts such as trip miles and all that can be reset


There should be two buttons associated with your readouts, NORMALLY one will change the readout, trip miles, fuel usage, etc, the other is normally for changing from imperal to metric (miles to kilometers) on MOST vehicles if you put it on the trip miles screen and hold down both buttons for a few seconds it will reset, some vehicles will even beep to let you know that you have reset your readouts.

Apr 07, 2015 | 2005 Chevrolet Blazer

1 Answer

How do I change the maintenance interval?


Hi there:
Hit "Select" until it shows the mileage then hold "Set" till it resets.
Check HERE the procedure.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 24, 2012 | 1996 Jeep Grand Cherokee

2 Answers

I need to know how to fix the oil change light after a oil change on 2009 mercury grand marque. The panel on the car always says ''change oil soon'' but the oil has already been changed.


Hi!!

The person that changed the oil should have resetted the light.

Just drive to an AutoZone store, ask for somebody to check your vehicle computer codes, once they check them up, ask them to reset the change oil soon light, they would do this at no charge. This is a free service they offered to all their customers.

Don't forget to rate this post. Good luck!!

May 23, 2010 | 2009 Mercury Grand Marquis

1 Answer

WHAT DOES IT MEAN WHEN YOUR PERFORM SERVICE LIGHT COMES ON? I JUST BOUGHT MY JEEP USED AND DID NOT GET A BOOK WITH IT,


this is a service reminder and can be reset by you, it refers to regular maintenance intervals the are recommended by the manufacturer that can be found in the owner's manual such as oil changes, air filter replacement, tune-ups etc., depending on the mileage of the vehicle. to reset, try this procedure. hit step button until console reads 0 miles to service. than hold down the reset button until display resets miles.

Mar 30, 2010 | 1998 Jeep Grand Cherokee

1 Answer

How do I turn-off my Maint. Need light after I change my oil on my 06 Toyota Tundra?


I get many calls a week for this procedure...
This is really easy! Follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change2.gif.

Hope this helps!

Nov 13, 2009 | 2006 Toyota Tundra

1 Answer

Maint. light came on and we changed the oil. How do I get the light to go off now? 2006 Toy. Corolla


I get many calls a week for this procedure...
This is really easy! Follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change2.gif.

Hope this helps!

Nov 08, 2009 | 2006 Toyota Corolla

5 Answers

How to make the service engine light go out after a 5000 mile oil change.


These instructions were posted to reset the Maint Required light on a Toyota Sienna. Process should be the same for your Corolla. Best of luck and hope this answers your question.
Greg

  1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
  2. Turn the car off (ignition key to the OFF position).
  3. Push in AND HOLD the button/knob that switches the odometer
  4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
  5. Release the odometer button/knob.
  6. Turn key to OFF position.
  7. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so

May 29, 2009 | 2006 Toyota Corolla

1 Answer

Oli indicator mileage reset


This is showing that your overdue for a sevice by 8,769. Depending on which service it will either say oil or inspection. With bmw's the order is of service is oil service .. inspection 1 ... oil service .... inspection 2. etc etc.

To reset the light the only tool you need is your finger. On some e46's there are 2 instrument cluster buttons (little rubber poles sticking out). If you press the left one with the ignition off you'll notice your mileage come up on the dash. This is the button you need to reset the service indicator.

With everything off,press and hold the same button and at the same time turn on the ignition to position 2 and wait a few seconds. It will then show the service and overdue mileage.Let go of the button and press and hold again until the 'reset' light flashes. Let go again and then hit the button once. Viola! The same can be done for resetting brake fluid light (clock symbol next to mileage) Instead of pressing and holding for the second time just press the button once to follow into a different menu for and the clock symbol will appear to be reset.

End of essay!

May 25, 2009 | 2003 BMW 325

3 Answers

Wrench light is on and odometer shows negative mileage


The negative number means the car should have had it's oil changed that many miles ago. Oil life starts at 100% for new oil & counts down every 10%. At 15% the display will always show, which means it's near time to change the oil.

usersteve83, your oil may have been changed but the timer not reset. Reset the timer as shown...
1. Turn ignition to the "ON" position. (do not start engine)
2. Press SEL/RESET repeatedly until the oil life indicator is displayed.
3. Press & hold the SEL/RESET for about 10 seconds until it blinks then let go of the button.
4. Press the SEL/RESET again for about 5 seconds or until the oil life indicator resets to 100%.

Wrench = Maintenance Minder: Symbol letter & number...
Symbol A - Relace engine oil.
Symbol B - Replace engine oil & filter, Inspect front & rear brakes, Check parking brake adjustment, Visually inpest the tie rods, suspension components,driveshaft boots, brake hoses & line (including ABS), all fluid levels & their conditions, exhaust system, fuel lines & connections.
Symbol 1 - Rotate tires.
Symbol 2 - Replace air cleaner element (dusty conditions every 15K miles) & replace dust & pollen filter (behind glovebox) every 15K miles if mainly dusty or city driving.
Symbol 3 - Replace transmission fluid.
Symbol 4 - Replace spark plugs.
Symbol 5 - Replace engine coolant.

All above are taken from the 2006 Civic EX owner's manual.

Dec 02, 2008 | 2006 Honda Civic Hybrid

2 Answers

Oil was changed and check engine light was not reset


This is really easy! Please follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON; do NOT start the engine

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and the light will be back on in 5,000 miles, to remind you of you next oil change.

Hope this helps, and thanks for choosing FixYa. Happy Thnkasgiving!

Nov 24, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
2006 Dodge Sprinter Logo

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...