Question about 1993 Jeep Cherokee Country

1 Answer

I need a wiring diagram for the jeep cherokee's temperature sender unit for a an m Registration 1994 model have you got one?

Posted by on

  • bull_dog125 Sep 10, 2008

    for the water that goes round the engine and shows the temperature of the engine on the dashboard

  • yadayada
    yadayada May 11, 2010

    Engine temp sending unit?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 242 Answers

The temperature sending unit is located on the right rear of the head. Next to the valve cover gasket. It is blocked from good access by the MAP sensor. If you remove the MAP sensor, the black flat thing mounted to the upper center of the firewall, you can access the temp sending unit with a deep well socket. Make sure the engine is cold, or the pressure of removing the TSU will send coolant everywhere.

Posted on Oct 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Color wire diagram for 2002 grand jeep cherokee oil sending unit plug

first off , the the book is free.
posted here 100s of times, endless....
here one more time.
chapter 8w covers all that. on all.GC.
WJ jeep that is.

oil sender of what, engine or trans.>>>>?????

it really is , all there.

free as a bird.. RTM !

Nov 24, 2015 | 2002 Jeep Grand Cherokee Limited

1 Answer

97 jeep grand cherokee where is the temperature sending unit location

That sender is either in the intake manifold or the thermostat housing(top radiator hose). It should have one wire connected to it. Use Teflon paste on the threads and don't over tighten.

May 15, 2017 | Cars & Trucks

1 Answer

Removal of serpentine belt on 1994 Jeep Grand Cherokee

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----
----------This will help. Thanks.

Jan 27, 2012 | 1994 Jeep Grand Cherokee

1 Answer

I need a power window diagram for my 1994 jeep grand cherokee

Review this documents about Jeep ZJ Grand Cherokee:
- ZJ-Secc-8S-Power-Windows
- ZJ-Secc-8W-Wiring-Diagrams (page 134)

I really hope helped with this (remember rated this help) Good luck.

Nov 12, 2009 | 1994 Jeep Grand Cherokee

2 Answers

Fuse box diagram for 1995 jeep grand cherokee laredo

I have the same model Grand Cherokee Limited 5.2L V8, nice truck; for fuse panel description and locations, check page 7 and next. All the infor that you need is here: Jeep-ZJ-Grand Cherokee-Secc-8W-Wiring-Diagrams.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 13, 2009 | 1994 Jeep Cherokee Country

1 Answer

1994 cherokee Dies, REstart's 90% of time

try removing the fuel pump /sender unit and see if the gauze filter is blocked first ,look into tank with a torch and make sure their isnt a plastic bag in the tank ?? also check the wires for overheating that lead into pump from connector block

Mar 04, 2009 | 1994 Jeep Grand Cherokee

1 Answer

1994 grnd cherokee jeep

unplug the wire from the fuel tank sender unit and earth that wire to the chassis. switch the ignition to the on position,not crank, and see if the dash gauge starts to move to the on position, if it does the problem is at the tank sender unit, assuming that the wire to the gauge is not damaged. sometimes just pulling that wire off can re-establish a decent contact when you reinstal it.also the tank sender unit should have a good earth.

Oct 08, 2008 | 1996 Jeep Cherokee

Not finding what you are looking for?
1993 Jeep Cherokee Country Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

78010 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides