Question about 1994 Hyundai Excel
i would like infor /diagram on repairing the window on Hyndai Excel ...i think it is a 1994 model. It is definitely manual nad on the driver's side - the right here in Australia
many thanks in advance
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the clutch is WORN OUT, there is NO adjustment. If you have recently replaced the clutch (disk), the adjustment is at the master cylinder (clutch master cylinder) push rod.
Posted on Jun 26, 2009
Hi first lift the car and be sure to secure the car that it wouldn't fall when your under the car, remove the wheels then disconnect the negative cable from the battery remove the axles, remove the transmission mount, remove the starter, remove the bolts around the transmission housing once you remove the bolts use a floor jack and put it under the transmission then use a prior and separate the tranny from the engine and bring the tranny to the floor now you have the clutch expose remove the old clutch and pressure plate and pilot bearing now do the same thing in reverse good luck
Posted on Sep 02, 2009
SOURCE: where is the clutch bleed valve?
It should be on the slave cylinder on the transmission. Don't forget to bleed the clutch master cylinder as well. To do this I believe that you will have to crack the line loose on it while someone or something holds the clutch pedal down.
Posted on Dec 12, 2009
Tips for a great answer:
Dec 19, 2015 | Hyundai Cars & Trucks
Dec 07, 2017 | Hyundai Accent Cars & Trucks
Dec 12, 2009 | 1994 Hyundai Excel
Sep 01, 2009 | 1991 Hyundai Excel 4 Door
Aug 14, 2009 | 1994 Hyundai Sonata
Dec 07, 2008 | Hyundai Motor 1998 Sonata
Dec 13, 2017 | 2006 Hyundai Tucson
Aug 26, 2014 | 1994 Hyundai Excel
Jun 24, 2017 | 1994 Hyundai Excel
912 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: