Question about 2006 BMW 650CIC

1 Answer

BMW F650 CS Spark Plug

Can't get to the plug to replace it - what's the trick?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 111 Answers

You have to remove the coils first

Posted on Sep 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Gap for 2008 bmw 750l1


You do not gap BMW plugs, they are pre-gapped when new. If the corners are rounded off, you need new plugs.

Oct 27, 2015 | BMW Cars & Trucks

1 Answer

How to change the spark plug on a 2003 cs 650 bmw motorcycle


The Spark Plugs are accessed from the Top of the Cylinders, one on each side.

Feb 17, 2014 | 2006 BMW 650CIC

1 Answer

Can you show me How to replace spark plug on BMW 525xi 2007


hi have a look at this http://www.pelicanparts.com/bmw/techarticles/E36-Spark-Plugs/E36-Spark-Plugs.htm it gives a step by step guide in picture form all mod bmw the same thing
hope this helps ivan

Oct 10, 2012 | Cars & Trucks

2 Answers

Wont start no spark on spark plug


For spark plug problem, click the help links provided below: ---
Car has no spark?

http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

------------
How to Replace Spark Plugs?

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html

-------------
Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?

http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

----------
How to gap spark plug ? http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

-----------
Spark plug Replacing for?

http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

-----------
How to identify number one spark plug on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

---------
How does the spark plug wire go on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

---------
Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html

-----------

This will help.

Thanks.

May 24, 2012 | 1990 BMW 525i

1 Answer

Car idles fine when i put down pedal it splutters misfires


It sounds like you have an engine misfire. I suggest you replace the spark plugs and spark plug wires wires, if the plugs are fairly new then just replace the spark plug wires

Mar 14, 2011 | BMW 318 Cars & Trucks

1 Answer

I have a 2004 BMW 545i. I'm currently working to remove all of the 8 spark plugs to check their condition. I'm unable to remove the ignition coils up and out of the spark plug holes on the two far rear...


sorry, don't know that one, but google BMW 545i coil removal and see what you get. Also, be careful getting the plugs out as some are often corroded in place due to aluminum/steel chemical reaction. Sometimes it takes an impact wrench to jar them back and forth a little at a time to get them out. Use high temp anti sieze on the new plug threads if you want to get them out again later. good luck.

Dec 21, 2010 | 2004 BMW 5 Series

2 Answers

Why does'int my 1986 bmw 528e start?


Do you spark at the plugs? Most likely crankshaft sensor needs to be replaced. Welcome to computer controlled cars. : (

Mar 30, 2010 | BMW 528 Cars & Trucks

1 Answer

How do I change the spark plugs on a BMW 523i engine and what is the correct spark gap?


The spark plug change is very straight forward. Basically, you remove the plastic valve cover trim panel, unplug the harness plugs from each of the ignition coils, remove the two nuts securing each coil, pull the coil up. The rubber spark plug connector boot should come up with the coil. You can now remove the spark plugs.

The spark plugs are not gappable. Install them as they come out of the box.

Replace the rubber connector boots at the same time, these wear out and can cause miss-fire problems.

Note that if you find oil in the spark plug wells, the valve cover gaskets must be replaced. Not only does this make a mess, but it deteriorates the boots and also causes miss-fires.

See the DIY article in the Spring 2005 issue of the Bavarian Autosport - Fast Times newsletter (see link below):

http://www.bavauto.com/shop.asp?HC1=0&HTarget=sc_fasttimes.asp&HCY=&HCM=

Contact Bavarian Autosport for the spark plugs and connector boots (and valve cover gaskets) at 800-535-2002, or order online.

Aug 31, 2009 | 2001 BMW 5 Series

1 Answer

Spark plug


Go to the nearest autozone parts store and they will assist you for free as long as you purchase the spark plug from them.

Feb 10, 2009 | 1995 BMW 7 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

599 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...