Question about 2000 Pontiac Grand Prix

5 Answers

Diagram on a pontiac grand prix

Can you help me find a diagram for a 2000 pontiac grand prix so i can see how to remove my ignition key cylinder

Posted by on

  • 2 more comments 
  • Anonymous Sep 19, 2008

    It a 2001 and how remove it or do i do the something to remove

  • Anonymous Mar 29, 2014

    How do i remove my headlights cover on a 2001 Pontiac Grand Prix

  • Anonymous Mar 31, 2014

    Remove front seats in 2000 Pontiac grand am

  • MARIAH
    MARIAH Aug 02, 2014

    HOW TO FIX A EVAP CONTROL

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have 07 Pontiac Grand Prix, the wrong key was inserted into the ignition the other day. Now when I try to use the correct key it will not insert completly in the ignition, goes in until last 1/4in of key. Im stuck, I bought the new lock cylinder but how do I get the old one out? I cant get the key to insert all the way so I cant get it to the "On" position, it will not turn at all. The key that was inserted in error is whole and nothing is missing it seems like there is something stuck. Any help would be appreciated...

Posted on Jun 23, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

Ignition Switch GM Century/Lumina/Grand Prix/Intrigue 1997-2000 The vehicles covered by this guide use one of two types of ignition switches:

  • A mechanical key and lock cylinder built into the steering column, that works a pull rod to actuate the separate electrical portion of the ignition switch mounted further down the steering column. For more information and replacement procedures on this type of switch, please see .
  • An instrument panel-mounted ignition switch is also used on some W-Body vehicles. To service this switch, the radio, heater & A/C control panel and the instrument cluster must be removed. All of these procedures are found elsewhere in this section.
REMOVAL & INSTALLATION
Instrument Panel-Mounted Ignition Switch
WARNING You must perform the Body Control Module (BCM) theft deterrent relearn procedure after replacement of the ignition lock cylinder. Failure to perform this relearn procedure means the BCM will not function properly. This means the vehicle will not be theft protected by the Passlock system and the engine may not crank or start. GM recommends that this procedure be performed with their Tech 2® or equivalent scan tool. An alternate relearn procedure is given at the end of this procedure.
  1. Disconnect the negative battery cable.
  2. Remove the radio assembly following the procedures found in this section.
  3. Remove the heater & A/C control head assembly following the procedures found in this section.
  4. Remove the instrument cluster assembly following the procedures found in this section.
  5. Detach the electrical connectors from the ignition switch.
  6. Insert the key and turn the ignition switch lock cylinder to the ACC position.
  7. Depress the transaxle park/lock cable retainer to release, then pull to remove the cable from the ignition switch.
NOTE You must perform the Body Control Module theft deterrent relearn procedure after replacement of the ignition lock cylinder.
  1. If it is necessary to remove the ignition lock cylinder from the ignition switch (theft damage, etc.), use the following procedure:
    1. Insert the key and turn the ignition switch lock cylinder to the ON position.
    2. Using a small flat-bladed tool, depress and hold the lock cylinder retaining tab.
    3. Using the key as an aid, pull to remove the ignition switch lock cylinder from the switch.
    4. Remove the key from the lock cylinder.
    5. Carefully pull to release the ignition switch bezel from the ignition switch lock cylinder.
  2. Remove the ignition switch bracket bolts and remove the ignition switch through the instrument panel cluster opening.
  3. Remove the bolts retaining the ignition switch to the bracket and remove the bracket.
diagram on a pontiac grand prix - 0900c15280090fea.jpgRemoving an instrument panel-mounted ignition switch assembly—1998 Oldsmobile Intrigue shown, others similar To install:
  1. Install the ignition switch to its bracket and install the bolts. Install the ignition switch into position through the instrument panel cluster opening and install the bracket retaining bolts.
  2. If removed, install the ignition switch lock cylinder to the ignition switch using the following procedure:
    1. Recode the lock cylinder, if necessary.
    2. Align the ignition switch bezel to the tabs on the ignition switch lock cylinder and carefully press to secure in place.
    3. Insert the key and turn the ignition switch lock cylinder to the ON position.
    4. Align the ignition switch lock cylinder to the ignition switch, then press into place.
  3. Turn the key to the ACC position. Align and press into place the transaxle park/lock cable to the ignition switch. Remove the key from the switch.
  4. Attach the electrical connectors to the ignition switch.
  5. Install the instrument cluster using the procedures found in this section.
  6. Install the heater & A/C control panel using the procedures found in this section.
  7. Install the radio assembly using the procedures found in this section.
  8. Connect the negative battery cable.
  9. If the lock cylinder was removed, perform the BCM Programming/RPO Configuration procedure.
THEFT DETERENT RE-LEARN—WITHOUT TECH 1®SCAN TOOL
This procedure takes approximately 30 minutes. Make sure the battery is fully charged before proceeding.
  1. Turn the ignition switch to the OFF position.
  2. Turn the ignition switch all the way from the OFF to the START position, then leave it in the ON position. The engine will not crank.
  3. The SECURITY light should come on and stay on for at lease ten minutes.
  4. Turn the ignition switch to the OFF position for five seconds.
  5. Repeat Steps 2, 3 and 4 again for a second time.
  6. Repeat Steps 2, 3 and 4 again for a third time.
  7. Turn the ignition switch to the OFF position.
  8. Turn the ignition switch all the way to the START position. The engine should now start.

Posted on Sep 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I want to 1990 pontiac grand prix 3.1L turbo intercool vacuum diagram

Posted on Jun 14, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an '08 grand prix....how do you set the year, date and etc.?

Posted on Jun 15, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need a diagram pontiac grand prix 04 for air conditioning motor
where is it at how do i get to it

Posted on Jul 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a ignition diagram for 2000 Pontiac grand


enter this into your computers search browser
and press return

"ignition diagram for 2000 Pontiac grand prix gt 3.8l"

Oct 14, 2014 | 2000 Pontiac Grand Prix

2 Answers

How do i replace a ignition lock cylinder on a


Not really a job for a non-mechanic. Column covers off, switches out of the way, wiring disconnected, column dropped down under the dash, bolts chiseled out, big job.

Sep 12, 2014 | 1999 Pontiac Grand Prix

1 Answer

GM 3.8 liter supercharge v6 firing order 2000 pontiac grand prix spark plug wire order


For the 2000 Pontiac Grand Prix:
I do not know if you have the 3.1L V6 or the 3.8L (including Super Charger) V6; however I have included both below...

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back).......
'...1....3....5...'
____________
'...2....4....6...'
.......(front)
Ignition Coil Connections:
.'.5..2.'..'.3..6.'..'.4..1.'


For the 3.8L V6 including the Super Charger:
Firing Order:
1-6-5-4-3-2
Cylinders:
.....(back).......
'...2....4....6...'
____________
'...1....3....5...'
......(front)
Ignition Coil Connections:
(back)
o 6
o ---3
___
o 2
o ---5
___
o 4
o ---1
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact us at FixYa.com!

Oct 08, 2010 | 2000 Pontiac Grand Prix

1 Answer

How do i remove the key cylinder on a 2000 grand prix


#1: You need to have a working key, and the cylinder must be able to rotate in the start postion.#2 You need the shroud cover, top and bottom. On the top of the colum is a small poke hole, with a pick the cylinder needs to be rotated to the START position and the poke hole should be poked. Ine cylinder will then pop out, Von LOCKEDOUT*LOST KEYS

Mar 25, 2010 | 2000 Pontiac Grand Prix

1 Answer

I have a 2002 grand prix the key will not remove from the ignition, how should i fix it.


try woggling the steering wheel and turn the key at the same time. id it will not come out the ignition cylinder will need a replacement

Feb 28, 2010 | 2002 Pontiac Grand Prix

2 Answers

I have a 2000 pontaic grand prix GT. My key seems to be stuck in the ignition, when i put it in park and go to shut off the car, the key goes back enough to shut it off but not back far enough to get the...


Do you have another spare key to try this problem out with? Does the same problem occur?.....sounds like you are probibly going to need to replace your lock cylinder

Nov 28, 2009 | 2000 Pontiac Grand Prix

1 Answer

Firing diagram for a 1996 grand prix. 6 cylinder.


For the 1996 Pontiac Grand Prix:
I do not know if you have the 3.1L V6 or the 3.4L DOHC V6; however I have included both below...

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back).......
|...1....3....5...|
____________
|...2....4....6...|
.......(front)
Ignition Coil Connections:
.|.5..2.|..|.3..6.|..|.4..1.|


For the 3.4L DOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back).......
|...1....3....5...|
____________
|...2....4....6...|
......(front)
Ignition Coil Connections:
(back)
o <---4
o <---1
___
o <---6
o <---3
___
o <---2
o <---5
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!





Nov 08, 2009 | 1996 Pontiac Grand Prix

1 Answer

2000 Garnd Prix Key will not turn either to start or accessories


try tapping the key into the lock cylinder with a small hammer to break it loose,sounds like you need a new ignition lock cylinder and housing

Oct 09, 2009 | 1998 Pontiac Grand Am

2 Answers

How do i remove ignition switch on steering cloumn of 2000 pontiac gran prix


unless u are familiar with air bag assemblies I suggest u take it to a qualified mechanic..if u accidently touch something wrong u can deploy the bag and cause serious harm to yourself..u have to remove the air bag in the steering column

Sep 16, 2009 | 2000 Pontiac Grand Prix

2 Answers

2001 Pontiac Grand Prix... Key stuck in ignition shifter will not move and car will not start. Got Battery check its ok replaced starter and solenoid was told it could be the ignition cylinder or swithch....


I think that you must have been using a doblicate key to start the engine it cannot be you ignition cylinder or swithch.. while now you will need to get it open in order to take out the key ..

Jun 28, 2009 | 2000 Pontiac Grand Prix

Not finding what you are looking for?
2000 Pontiac Grand Prix Logo

13,969 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...