Question about 1999 Chevrolet Silverado 1500

1 Answer

Window regulator? Has anyone ever changed or replaced a power window regulator ? Well let me know

Posted by on

1 Answer

Yes. Not hard at all. Remove door panel. You can look up in the door and see the bolts for the regulator. Make sure to tape the window up or it will fall when you remove the regulator. Also make sure to loosen the clamp that hold the regulator to the glass. It took about 25 minutes to do and that was also figuring out how to do it.

Posted on Sep 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Crank window to replace power window on 1986 vette


I think you would know that you have to
change the window regulator to a crank type

Jan 11, 2013 | 1986 Chevrolet Corvette

Tip

How To Install Replace Rear Power Window Regulator 1999-05 VW Volkswagen Jetta


1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or damaged window regulator. This video is applicable to the 99, 00, 01, 02, 03, 04, 05, Volkswagen Jetta.

1999 Volkswagen Jetta Window Regulator

on Jun 26, 2014 | Volkswagen Jetta Cars & Trucks

1 Answer

Drivers side window regulator needs replacing, power window siezed in icy weather (didn't realize it), something snapped, glass is ok, window wont stay up. thank you for your time, really appreciate it! M


buy a new regulator on ebay or at a parts store, stay away from dealers. pay a glass shop to install it.
if you have ever changed a regulator, you would gladly pay anyone 50 bucks to do it for you the next time. there are several neat little tools and connectors which come in handy for this task, a glass shop will have them, you won't. if you follow my advice you will have about 150 bucks in it, if you go to a dealer it will be about 400.

Dec 08, 2010 | 1997 Dodge Dakota

1 Answer

Does anyone know the part number for 2000 Daewoo leganza driver's window power window motor? I have located new motors but the seller doesn't know which motor fits the driver window? If I can get the...


www.daewoous.com has complete breakdown of Daewoo parts. Prices are competitive and they have most in stock. Their diagrams show the motors for front door, left and right as well as back door left and right. Part numbers are listed also.

Jun 19, 2010 | 2000 Daewoo Leganza

2 Answers

My driver side window wont go up. When tested no power going to it. But the fuse isnt bad. Anyone have any ideas? When button is pushed down the relay clicks.


The problem will be either the window switch or window regulator motor. With the relay clicking sounds like window regulator. It easiest and and costs only a couple dollars more to get and replace the whole assembly versus just the motor. I hope this is helpful.

Mar 15, 2010 | 2001 Ford Taurus

2 Answers

How do i replace the power window door regulator?


auto zone can print for you the step by step instructions, they have alldata

Jan 21, 2010 | 2002 Ford Explorer

1 Answer

Power window problem. engauges then disenguages


Section 01-11: Glass, Frames and Mechanisms 1997 Windstar Workshop Manual REMOVAL AND INSTALLATION Door Glass and Regulator, Power Windows Removal
svw~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel (23942) and front door inside panel sound insulator (20394). Refer to Section 01-05 .
  1. Remove inside door belt weatherstrip.
  1. Remove front door window glass (21410) as described in this section.
  1. Remove two nut and washer assemblies attaching the window regulator equalizer arm bracket (23230).
  1. Remove four rivets retaining the front door window regulator base plate to door inner panel.
  1. Remove front door window regulator (23200) and front door window channel bracket (23288) from vehicle.
  1. Working on a bench, carefully bend tab flat to remove front door window regulator arm slides from front door window channel bracket.
  1. NOTE: Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket. Make sure rubber bumper is installed properly on new front door window channel bracket, if replacement is made.

    Install new front door window regulator arm plastic guides into front door window channel bracket and bend tab back to 90 degrees.


    a9ef3ee.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive (23394) are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Door Glass and Regulator, Power Windows .

  1. Install window regulator electric drive with preassembled front door window channel bracket into vehicle. Set the regulator base plate to door inner panel using base plate locator tab as a guide.
  1. NOTE: Two 1/4-20 x 1 inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (35-44 lb-in). Equivalent metric retainers may be used.

    Install four rivets to retain front door window regulator to door inner panel.
  1. Install window regulator equalizer arm bracket.
  1. Lower front door window regulator arms to access holes in door inner panel. Install front door window glass as outlined.
  1. Install inside door belt weatherstrip.
  1. Adjust front door window glass to make sure it is properly aligned with glass run. Check window for smooth operation.
  1. Install front door trim panel and front door inside panel sound insulator. Refer to Section 01-05 .


    Door Glass and Regulator
ac1dac5.gif

Item Part Number Description 1 21410 Front Door Window Glass 2 23288 Front Door Window Channel Bracket 3 23394 Window Regulator Electric Drive 4 23230 Window Regulator Equalizer Arm Bracket 5 222A00 Front Door Glass Run Latch Side Retainer 6 N621906-S36 Nut and Washer 7 N800510-S36 Screw 8 23200 Front Door Window Regulator 9 W525172-S Rivet 10 W525175-S Rivet 11 — Wire Connector (Part of 14630 Wire Assembly) A — Tighten to 7-10 Nm (62-89 Lb-In)

Apr 13, 2009 | 1997 Ford Windstar

1 Answer

Grand Am Power Window Replacement


Are you able to loosen any other bolts that could cause the window to come down more? You could also try manually turning the gears to lower the window...

Apr 10, 2009 | 2001 Pontiac Grand Am SE

1 Answer

What is wrong with passenger window 2004 volvo xc70


sometimes the window clips, or guides, can loosen. if you're not careful and keep operating the window, it could contact the window regulator arms and bend them. this will require window regulator replacement

Jan 08, 2009 | 2005 Volvo XC70

2 Answers

Bad Windows and Door Lock...Please Help


My Audi A4 is a 99, so they're the same vintage, and the A4s have a fairly common rate of failure for the window regulators. They're easy to change, but usually expensive to buy. You probably will have the most luck on eBay sourcing them at a good price. You remove the door panel (www.vwvortex.com will probably have a tech article detailing this), unbolt the regulator from the window assembly (in my A4 it's three bolts), and it pops straight out. Disconnect the electrical connector, and reverse the procedure to install the new one.


Aug 26, 2008 | 1998 Volkswagen Jetta

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...