Question about 2000 Oldsmobile Alero

1 Answer

Flashing security light

When trying to start car security light comes on and car won't start. turn key off wait 10 minutes light goes off car will then start.

Posted by on

  • 1 more comment 
  • Anonymous Mar 21, 2014

    No security lights at all come on and car will not start for several tries

  • Anonymous Mar 22, 2014

    car dont start and the security light comes on when u r driving

  • Anonymous Mar 23, 2014

    right before it dies the rpms go up security light flashes off and on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

If ur key has the security chip in it, it possible that ur ignition switch isnt reading that chip right away. i mean as long as u can get ur car started try and not get too worried about it. it is possible that ur ignition might be goin bad so try to keep an eye on it and if it starts to get worse take it in.

Posted on Sep 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 chevy traverse wont start after hooking amp up car was fine


OK. you had the battery disconnected. Here is what you do. Turn on the key. The security light will begin to flash. Wait (about 10 minutes) with the key in the ON position. The security light will stop flashing. TURN OFF the key. Then, turn on the key and start the car. Security system is supposed to prevent theft for a 10 minute delay. This usually discourages any thief. This will work, You just need to be patient with the 10 minutes. It seems like an hour when you wait ten minutes for that security light to stop flashing.

Mar 19, 2017 | 2009 Chevrolet Traverse

1 Answer

Pontiac Montana 2003. Security,low fuel,and battery light are flashing. Full gauge not even coming on and radio won't work. Car won't start


Turn key on but do not attempt to start. Wait 10 minutes. Turn off. Then on. Make sure security light goes off before trying to start. Sounds like security system thinks vehicle is being stolen

Oct 20, 2016 | Pontiac Cars & Trucks

1 Answer

What does a car with a lock light mean


Chevrolet Malibu Questions - SECURITY SYSTEM LIGHT ...

www.cargurus.com > Questions > Chevrolet > Malibu

CarGurusFeb 3, 2014 - SECURITY SYSTEM LIGHT COMES ON - CAR TURNS OVER WON[T START ... Insert the ignition key into the driver door lock. ... When I start my car 3 keys programmed pops up on my dashboard what does that mean.

Chevrolet Malibu Questions - Why does the anti theft system ...

www.cargurus.com > Questions > Chevrolet > Malibu

CarGurusFeb 23, 2011 - Why does the anti theft system keep tripping on my 03 malibu - Every other day my anti-theft system goes off in my car then I have to reset it. It's not ha... ...it needs a pass lock sensor/ ignition lock cylinder. 10 out of 10 people think ... Wait 10 minutes until the light stops flashing, then start. Repairs could run ...

No Start Due to Failed Passlock Sensor : Chevrolet Malibu ...

repairpal.com > Problems > Chevrolet > Malibu

Jan 13, 2016 | 2005 Chevrolet Malibu Maxx

1 Answer

I have a 2003 chevy malibu that won;t start. When you turn the key to on the Theft System light comes on steady ( no flashing). I t used o go into this mode periodically where the Theft System light...


I have had the same problem. This has happened to me three times in the past nine months or so. Per the owner's manual, you turn the key to the on position and wait about ten minutes. This resets the system and when the "Theft System" light goes out, it starts right up. I did this each time and it started right up.

Jan 02, 2013 | 2003 Chevrolet Malibu

3 Answers

We bought a new ignition switch for the key not coming out of the ignition but when we installed the new switch the car wouldn't start...is there a step that we're missing? (2004 Aztek)


Hello: TRY THIS Attempt to start the car leave the key on for 10 minutes or until the security light goes out, at this time turn key off for 10 seconds, turn switch on for ten more minutes or when security light goes out, turn key off for 10 seconds. Turn key ON for ten minutes or when security light goes out, turn key off wait 10 seconds, then start car....

Jul 31, 2011 | 2004 Pontiac Aztek

3 Answers

I had my ignition cylinder & housing replaced now my car won't start. How do I reset the passlock system so my car will start


Hello, Try this: Get in car, turn the key to start, when it don't start let key come back to run (do not turn off) The security light should be blinking, let car set for about ten minutes or until security light stays on steady at that time turn key off for 10 seconds then turn back on (do not go to start) security light will be blinking again wait 10 minutes and security light should go out. Turn key off, wait 10 seconds . Turn key on (do not go to start) security light will be blinking again, wait 10 minuets and security light will go out. AT THIS TIME TURN KEY OFF FOR 10 SECONDS THEN START THE CAR.

Sep 14, 2010 | Saturn SL1 Cars & Trucks

3 Answers

Replaced ignition switch 2003 chevy impala and car will not start


After you replace the ignition switch turn the key to start the car and release leave the key were it stops after trying to start wait 10 minutes until security light goes out turn key to full off position then repeat the above procedure two more times for a total of three on the 3rd attempt to start car wait for light to go out then turn key to full off positoion wait 10 seconds then try to start car body control module should learn new pass code and the car should start.
Big john, J@J Automotive

Sep 15, 2009 | 1999 Chevrolet Lumina

2 Answers

1996 Oldsmobile Achieva: Security light flashes upon startup


Here is what you do, but only when the SECURITY light flashes - if it is always ON or OFF it's no use.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes ( SECURITY light will flash for 10 minutes and then stay on SOLID)
Turn the key to OFF
Wait 5 seconds.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes.
Turn the key to OFF
Wait 5 seconds.
Turn the key in the ignition to ON.
Wait for exactly 10 minutes.
Turn the ignition OFF.

Start the car normally.
It has relearnt the keycode and you're good to go.
NOTICE - it takes 30 minutes to relearn, that's THREE cycles of ON - 10 minutes - OFF.

Good luck.

Jul 11, 2009 | 1996 Oldsmobile Achieva

2 Answers

Security light flashes car cranks but won`t start any way to bypass security .


turn key on for 10 minutes until light stops flashing then try to crank car over

May 23, 2009 | 1999 Oldsmobile Alero

2 Answers

Car wont start


Put your key in turn it on dont start wait 10 mins remove key wait 10 seconds repeat this a total of 3 times. If that dont work try a different key do the same thing. If that dont work a dealer needs to probably replace and reprogram your ignition switch and keys

Apr 07, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
2000 Oldsmobile Alero Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...