Question about 1997 Honda Accord

1 Answer

Speed Sensor Check engine light's on, says turbine speed sensor isn't working, speedo is out too, obviously, I need to know where the speed sensor is located

Posted by on

  • 2 more comments 
  • fefloresjr Feb 26, 2009

    I HAVE THE SAME PROBLEM WITH MY 1997 HONDA ACCORD, THE D (DRIVE) LIGHT KEEPS FLASHING AND THE CHECK ENGINE LIGHT STAYS ON. I ALREADY CHANGED THE SPEED SENSOR THAT IS LOCATED ON THE TRANSMISSION LIGHT WENT OFF AT FIRST THEN WHEN I STARTED DRIVING CHECK ENGINE LIGHT CAME BACK ON AND D ( DRIVE) LIGHT STARTED FLASHING AGAIN. CAN ANY ONE TELL ME WHAT I CAN DO NOW!!!!!!!!!

  • mdullea Feb 26, 2009

    I have a 1997 Honda Accord LX. The check engine light came on about a month ago indicating a problem with the turbine speed sensor. The car shifts and drives normally, i.e. I don't notice any problem. The car has 216,000 miles. It burns no oil and drives beautifully. How much does a sensor cost?

  • Anonymous Mar 13, 2014

    need to locate a turbine speed sensor for 2007 ml320

  • Anonymous Mar 26, 2014

    Speed turbine input sensor code. Engine light on. Drive light flashes and vehicle won't change gears until I shut down and re-start.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

HI..
The Speed sensor on your Honda Accord 97.
Is located on the Transmission.
If you follow the Lower Radiator hose from the rad to the engine.
The hose end on the Thermostat housing.
OK.. Just on direction of the thermostat housing .
Under the housing you Will see on the transmission the Speed sensor, with a connector of 3 wires. Is the only sensor at this
Part of the Transmission..

Ok. I hope this work on your question.
Thank you for use fixya..

Posted on Sep 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Po715


I do not believe so . Code p0715 if that relates to your question refers to the turbine shaft speed(TSS) sensor-circuit malfunction===causes wiring--TSS sensor--ECM/TCM
The drive speed sensor is the sensor that works the speedo and sends impulses to the transmission control module to change gears in relation to the turbine speed sensor
This is how the TCM knows when to change ratios in the transmission because of the differences in recorded speeds of the engine torque convertor and the drive shaft

Aug 20, 2014 | 2001 Jeep Cherokee

1 Answer

Speed sensor


The sensor should be in the side of the transmission.
The speedo would stop working, or you would have shifting troubles with the transmission. And you would have a check engine light on with a trouble code for the sensor.

Jul 23, 2013 | Mazda Cars & Trucks

1 Answer

Broken Speedometer?


You are correct in thinking if the speed sensor fails the check engine light should be on, and you should experience problems with the transmission.
It sounds like just the speedo has failed.

Jul 22, 2013 | Cadillac Escalade Cars & Trucks

2 Answers

Check engine code PO715


Transmission Input Speed Sensor (G182 VAG com code): Circuit Malfunction
The Input Turbin Speed Sensor is located inside the transmission, the code can be caused by a failed sensor or sensor wiring or a slipping transmission.

Jan 16, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

Speed metter does not working also engiine light check on


This problem may be a fuse blown, or a faulty speed sensor, wiring for speedo, or other problems with speedo cluster. You said check engine light was on, this may be related to speedo. As computer reads vehicle speed it controls trans, engine, even radio volume as vehicle changes speed. Try looking for any blown fuses first.

Oct 30, 2010 | 1998 Honda Accord

2 Answers

2000 windstar transmission code 715 turbine speed sensor need to replace, where is it and should I do it.


turbine speed sensor is the torque converter speed ,but where and how it works i do not know,i would buy a manual vehicle nyself at least it doesnt cost the earth when the clutch wears out

Jul 16, 2010 | 2000 Ford Windstar

1 Answer

4r70w speedo quits and transmission quits shifting, replaced turbine speed sensor & abs sensor in diff, still has same problem


Be sure to check the vss (vehicle speed sensor) at the output shaft as it's a major input for both engine and transmission. This is the first one to suspect.

Jun 25, 2009 | 2003 Ford E150

1 Answer

I have a 1998 ram 1500 4x2 it showing a 0500 code, speed sensor.


Yes I had the same problem and it was the sensor on the rear axle.

Jun 03, 2009 | 1999 Dodge Ram

1 Answer

Speedo not working corectly


This is an electronic speedo, could be several things but probably 1st and easiest thing to try is repalceing the vehicle speed sensor(vss). Also need to know if check engine light is on, and if any other electrical items are malfunctioning.

May 31, 2009 | 1997 Toyota RAV4

4 Answers

95 subaru impreza ;speedometer quit,engine light stays on


i had this problem with mine if your cable spins wen the car is moving its not the gear box end or the cable its the speed sensor in the speedo its self its very easy to fix you have to strip the speedo out of the case the sensor is only small and on the under side of the speedo the sensor is about 50 mm long and 10 mm wide change that and it should be ok
oh remember to reset your ecu

Nov 15, 2008 | 1995 Subaru Legacy

Not finding what you are looking for?
1997 Honda Accord Logo

1,180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...